Type: Wireless Presenter System with CVL Lavalier Microphone
Specification: BLX1:
Audio Input Level:
max: -16 dBVmaximum
min (0 dB): +10 dBVmaximum
Gain Adjustment Range: 26 dB
Input Impedance: 1 Mohm
RF Transmitter Output:
10 mW, typical
varies by region
Dimensions: 4.33 in. x 2.52 in. x 0.83 in. (110 mm x 64 mm x 21 mm) H x W x D
Weight: 2.6 oz. (75 g), without batteries
Housing: Molded ABS
Power Requirements: 2 LR6 AA batteries, 1.5 V, alkaline
Battery Life: up to 14 hours (alkaline)
BLX4:
Output Impedance::
XLR connector: 200 ohm
6.35 mm (1/4") connector: 50 ohm
Audio Output Level:
Ref. +/- 33 kHz deviation with 1 kHz tone
XLR connector: -27 dBV (into 100 kohm load)
6.35 mm (1/4") connector: -13 dBV (into 100 kohm load)
RF Sensitivity:
-105 dBm
for 12 dB SINAD, typical
Image Rejection: >50 dB, typical
Dimensions: 1.57 in. x 7.40 in. x 4.06in. (40 mm x 188 ...
System Requirements: MINIMUM:
OS: XP, Vista, Windows 7, 8, or 10 (32 or 64 bit)
Processor: 1.8 GHz Dual Core CPU
Memory: 2 GB RAM
Storage: 1310 MB available space
Sound Card: Sound card, USB, or Firewire sound device
RECOMMENDED:
OS: XP, Vista, Windows 7, 8, or 10 (32 or 64 bit)
Processor: Quad Core or higher
Memory: 4 GB RAM
Storage: 1310 MB available space
Sound Card: Sound card, USB, or Firewire sound device
Specifications: Average Particle Size:
<0.49 micron <0.000020 inch
Extended Temperature Limits:
Peak: -50 Degrees C to >180 Degrees C
Long-Term: -50 Degrees C to 130 Degrees C
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
Specifications: Occupancy: 3 x 5.25" Drive Bays
Capacity: 4 x SATA 3.5" HDD or 4 x SATA 2.5" HDD or SAS HDD
Supports Hot-Swap: SATA I / II / III
Cooling Subsystem: 1 x 120mm Exhaust Fan
Material: Steel & ABS
Dimension: 5.87" x 5.02" x 8.27"
Weight: 2.65 lbs.