Specifications: Load Rating: 20 amps @ 120 volts
Maximum Load Inrush Energy: 1400 Joules total during power-up
UL 1449 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, B3 pulse; Measured suppressed voltage: 170 volts; no failures
Federal Guidelines: Grade A, Class 1, Mode 1(CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load): > 30 dB 100 KHz - 50 MHz
EMI/RFI Filter, Common Mode (50-ohm load): > 20 dB 1 MHz - 50 MHz
Under-Voltage Auto Shutdown: Adjustable from 90V to 110V
Over-Voltage Auto Shutdown: Adjustable from 130V to 150V
Endurance (C62.41-1991 Category B3 pulses): 1 kV>500,000; 3 kV>10,000; 6 kV>1000
Control Inputs: Momentary Switch, Latching Switch,Contact Closure or 5-30 Vdc
Input Control Current: 3 mA
DC Voltage Output: 12 Vdc, 40 mA maximum load
Auxiliary Relay Cont...
Specifications: Output:
Nominal Output Voltage: 100V, 120V
Maximum Total Current Draw per Phase: 30A
Output Connections: (6) NEMA 5-15R, (2) NEMA 5-20R
Overload Protection: Yes
Cord Length: 10 ft (3.05 meters)
Input:
Nominal Input Voltage: 100V, 120V
Input Frequency: 50/60 Hz
Input Connections: NEMA L5-30P
Cord Length: 10 feet (3.05 meters)
Number of Power Cords: 1
Maximum Line Current per phase: 24A
Maximum Input Current per phase: 24A
Load Capacity: 3000 VA
Load Power Factor Range: 0 to 1
Color: Black
Specifications: Input Voltage: 110 V AC
Output Voltage: 120 V AC
Current: 24 A Total Current Draw Per Phase
Frequency: 50 Hz
Input Voltage Range: 120 V AC
Protection Type: Surge
Switching Time: 6 ms
Receptacles: Hardwired
Plug/Connector Type: Hardwired
Switch Type: Open Transition
Compatibility: CyberPower Systems Smart App Sinewave UPS Systems
CyberPower Systems Smart App Intelligent LCD/AVR UPS Systems* (CPS1500AVR UPS system is NOT supported)
CyberPower Systems Automatic Transfer Switch (ATS) Power Distribution Units (PDU)
Please see RMCARD Compatibility Chart in the Resources section for details
Note: *UPS systems manufactured in or before 2010 may have a ribbon cable coming out of the RMCARD port and are not compatible with the RMCARD205.
Specifications: System Requirements:
An Ethernet network connection
Web Browser
Network Management System (NMS) compliant with SNMPv1/v3 (optional)
Specifications: Load Rating: 20 amps @ 120 volts
Maximum Load Inrush Energy: 1400 Joules total during power-up
UL 1449 Adjunct Classification Test Results: 1000 surges, 6000 volts, 3000 amps, B3 pulse; Measured suppressed voltage: 170 volts; no failures
Federal Guidelines: Grade A, Class 1, Mode 1(CID A-A-55818)
EMI/RFI Filter, Normal Mode (50-ohm load): > 30 dB 100 KHz - 50 MHz
EMI/RFI Filter, Common Mode (50-ohm load): > 20 dB 1 MHz - 50 MHz
Under-Voltage Auto Shutdown: Adjustable from 90V to 110V
Over-Voltage Auto Shutdown: Adjustable from 130V to 150V
Endurance (C62.41-1991 Category B3 pulses): 1 kV>500,000; 3 kV>10,000; 6 kV>1000
Control Inputs: Momentary Switch, Latching Switch,Contact Closure or 5-30 Vdc
Input Control Current: 3 mA
DC Voltage Output: 12 Vdc, 40 mA maximum load
Auxiliary Relay Cont...
Specifications: Output:
Nominal Output Voltage: 100V, 120V
Maximum Total Current Draw per Phase: 30A
Output Connections: (6) NEMA 5-15R, (2) NEMA 5-20R
Overload Protection: Yes
Cord Length: 10 ft (3.05 meters)
Input:
Nominal Input Voltage: 100V, 120V
Input Frequency: 50/60 Hz
Input Connections: NEMA L5-30P
Cord Length: 10 feet (3.05 meters)
Number of Power Cords: 1
Maximum Line Current per phase: 24A
Maximum Input Current per phase: 24A
Load Capacity: 3000 VA
Load Power Factor Range: 0 to 1
Color: Black
Specifications: Input Voltage: 110 V AC
Output Voltage: 120 V AC
Current: 24 A Total Current Draw Per Phase
Frequency: 50 Hz
Input Voltage Range: 120 V AC
Protection Type: Surge
Switching Time: 6 ms
Receptacles: Hardwired
Plug/Connector Type: Hardwired
Switch Type: Open Transition
Compatibility: CyberPower Systems Smart App Sinewave UPS Systems
CyberPower Systems Smart App Intelligent LCD/AVR UPS Systems* (CPS1500AVR UPS system is NOT supported)
CyberPower Systems Automatic Transfer Switch (ATS) Power Distribution Units (PDU)
Please see RMCARD Compatibility Chart in the Resources section for details
Note: *UPS systems manufactured in or before 2010 may have a ribbon cable coming out of the RMCARD port and are not compatible with the RMCARD205.
Specifications: System Requirements:
An Ethernet network connection
Web Browser
Network Management System (NMS) compliant with SNMPv1/v3 (optional)