"MOUNTS-1"

• Type: Office Products
• Model #: JW052A

• Type: Other
• Specifications: Materials : SPCC steel construction ABS plastics Dimensions: 0.40" x 19.00" x 1.77" Weight: 0.57 lb. Package Contents: TC-KP24 Mounting hardware Quick Installation Guide
• Model #: TC-KP24 (v1.0R)

• Type: Other
• Specifications: Standards ANSI/TIA/ EIA-568-B.2-1 EN50173-1: 2002 ISO/IEC 11801 2nd edition: 2002 Interface 12 x RJ-45 ports with 50 micron gold-plated 8P/8C contacts T568A/T568B wiring for Krone 110 termination with color-coded wiring diagram 90 degree IDC terminals Compatible with 22 - 26 AWG solid or stranded wire Integrated cable management SPCC steel construction 18 AWG grounding wire with screw terminal Mounting Options: Wall mountable Electrical Specification Insulation resistance: >= 500 M Ohms Dielectric Withstand Voltage: 500V DC Contact resistance: <= 35 M Ohms Current rating: 1.5A at 20 degree C (68 degree F) Mechanical Specification Contact force 99.2g (3.5 oz.) Plug retention force: 13.3kg (29.00 lbs.) 110/ Krone IDC insertion force: min. 4.5kg (9.90 lbs.) 110/ Krone IDC retention force: min. 0.5kg (1.10 lbs.) Operating Tempera...
• Model #: TC-P12C6AS (V1.0R)

• Model #: ADIB07KFP5673

• Type: Other
• Specifications: Materials : SPCC steel construction Nickel plated shielded construction Dimensions: 3.70" x 19.00" x 1.77" Weight: 1.40 lbs. Package Contents: TC-KP24S Mounting hardware Grounding wire Quick Installation Guide
• Model #: TC-KP24S v1.0R

• Type: PoE Injector
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE IN LNK / ACTESD Protection: 4 KV DC EFT Protection: 2 KV Enclosure Metal: case Installation: Wall mount or DIN rail with optional kit Power Requirements: RJ45 PoE Input: 802.3at/af 48~56V DC DC Input: 48~56V DCStandards Compliance: Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet (802.3at Type 2)
• Model #: LRP-101CH

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45 auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE-in-use LNK / ACT ESD Protection: 4KV DC Enclosure: Metal case Installation: Wall mount or DIN rail with optional kit Power Requirements: BNC Power over Coaxial Input: 44~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet Plus(802.3at Type 2)
• Model #: LRP-101CE

• Type: PoE Repeater
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit PoE/PoE+ in port 1 x Gigabit PoE/PoE+ out port 1 x Power port (optional power adapter is not included) LED indicators Installation mounting points Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Powered by PoE/PoE+ Device Consumption: 2 Watts (max.)
• Model #: TPE-E110

• Type: PoE Repeater
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit PoE/PoE+ in port 1 x Gigabit PoE/PoE+ out port 1 x Power port (optional power adapter is not included) LED indicators Installation mounting points Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Powered by PoE/PoE+ Device Consumption: 2 Watts (max.)
• Model #: TPE-E100

• Model #: S0J42A

• Type: PoE Injector
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both mid-span and end-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100m Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE IN LNK / ACTESD Protection: 4 KV DC EFT Protection: 2 KV Enclosure Metal: case Installation: Wall mount or DIN rail with optional kit Power Requirements: RJ45 PoE Input: 802.3at/af 48~56V DC DC Input: 48~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet (802.3at Type 2)
• Model #: LRP-101UH

• Type: PoE+ Injector
• Color: Black
• Specifications: Package Includes: NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector External power supply (Input: 100–240V, 50/60 Hz, 0.75A) (4) International plug adapters (North America, Europe, U.K., Australia) Owner's manual Power Consumption (Watts): 30.00 LED Indicators: Orange (Power On), Purple (PoE On) Unit Dimensions: 1.40" x 2.60" x 5.40" Unit Weight: 0.55 lb. Network Compatibility: 1 Gbps (Gigabit) IEEE Standards Supported: 802.3; 802.3ab; 802.3af; 802.3at; 802.3u PoE Capability: 30W (802.3at) PoE Supported Ports: 1 Side A - Connector 1: RJ45 (FEMALE) Side B - Connector 1: RJ45 (FEMALE) Network Switch Ports: 10/100/1000 (RJ45) PoE Type: Type 2 PoE+ (30W, IEEE 802.3at) Max. Power Delivered by PSE: 30.0 W
• Model #: NPOE-30W-1G-INT

• Part Number: AS445C-POE-INJECTOR
• Type: PoE++ Injector
• Specifications: Technical Information Protection Type: ESD Protection Power Description Input Voltage: 120 V AC 230 V AC Maximum Output Voltage: 54 V DC Maximum Input Current: 2.50 A Maximum Output Current: 3.30 A Maximum Output Power: 160 W Interfaces/Ports Output Ports: 4 x Multi-Gigabit PoE++ Physical Characteristics Product Color: Black Form Factor: DIN Rail/Wall Mountable Height: 1.5" Width: 2.8" Length: 3.7" Weight (Approximate): 9.80 oz Miscellaneous Package Contents: PoE++ Injector 1 x Universal Power Adapter 1 x DIN Rail Mounting Kit 1 x Quick-Start Guide Compatibility: IP cameras access control devices remote kiosks (POSs) wireless access points PoE lighting digital signage. Certifications & Standards: IEEE 802.3af IEEE...
• Model #: AS445C-POE-INJECTOR

• Part Number: IMC1GSFP30W
• Type: Media Converter
• Color: Black
• Specifications: Network Technology: 1000Base-TX, 1000Base-T Power Description Plug/Connector Type: Terminal Block (3 Wire), Type N Expansion Slot Type: SFP (mini-GBIC) Number of SFP Slots: 1 Total Number of Expansion Slots: 1.0 Network (RJ-45): Yes Number of PoE (RJ-45) Ports: 1 Total Number of Ports: 1 Media Type Supported: Twisted Pair Fiber Mode Supported: Optical Fiber, Single-mode, Multi-mode Weight (Approximate) 2.80 oz Height 1.9", Width 1.4", Depth 2.3" Environmental Compliance: Restriction of Hazardous Substances (RoHS), Waste Electrical and Electronic Equipment Directive (WEEE)
• Model #: IMC1GSFP30W

• Type: Mounting
• Model #: FlexHD-CM-3

• Type: PoE Injector
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit port 1 x PoE+ Gigabit port 4-pin removable terminal block LED indicators DIN-Rail mount Wall mount Grounding point Data Transfer: RateEthernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Input: 48 – 56 V DC Compatible power supply: TI-S12048 (sold separately) Consumption: Max. 36 Watts PoE: PoE budget: 30 Watts Pin 1,2 for power- and pin 3,6 for power+ (mode A)
• Model #: TI-IG30

• Type: PoE Injector
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit port 1 x PoE+ Gigabit port 4-pin removable terminal block LED indicators DIN-Rail mount Wall mount Grounding point Data Transfer: RateEthernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Input: 48 – 56 V DC Compatible power supply: TI-S12048 (sold separately) Consumption: Max. 72 Watts PoE budget: 60 Watts Pin 1,2 for power+ and pin 3,6 for power- (mode A) Pin 4,5 for power+ and pin 7,8 for power- (mode B)
• Model #: TI-IG60

• Type: Mounting
• Color: RAL 9003 Signal White
• Specifications: Height: 1.3U / 2U 2U with the supplied front plate Dimensions (height x width x depth): 2.32" x 18.98" x 8.54" Number of connections brought to the front: 10 Console port to the front: Yes Cables: 10x 0.5m cables Couplers: 9x RJ45 couplers 1x USB Couplers Supported Models: Sophos XGS 87 Sophos XGS 107 What's in the box? - 1x SoRack + couplers - 1x Rackmount.IT front plate - Cables - Assembly materials - Installation guide
• Model #: RM-SR-T11

• Type: PoE Extender
• Specifications: Power consumption: 1.3 watts via POE Forwarded PoE Power: Up to 75 watts depending on standard Maximum current 0.7 amps on data pairs Maximum current 1.5 amps on spare pairs PoE Standards: IEEE 802.3af POE (15W) and IEEE 802.3at at POE Plus (2-event signature) (25-30W) IEEE 802.3bt POE (to 75W) Custom POE (incl. "always-on 48V" and "4-pair" POE) Ethernet Interface: Two independently auto-configuring 10/100 ports (10Base-T / 100Base-TX, half / full duplex) Patch or crossover cables supported LEDs Status indicators: Green LED - shows POE Power good Yellow LED - shows Ethernet link / activity Dimensions: 1.22" x 8.27" x 1.97" Weight: 0.23 lb. Mounting: 2/4 Bolt 7mm mounting holes. On 50/60mm centres Operating temperature: -40 degree C to 70 degree C [-40 degree F to 158 degree F] Relative humidity: Up to 85%, non-condensi...
• Model #: VOR-ORM-XT

• Type: ePMP 1000 GPS Sync Radio
• Model #: C050900A011A-BD5

• Type: Mounting
• Specifications: 0.5U design 220 x 97 x 25mm (8.66" x 3.80" x 0.98")
• Model #: TC-P12C6AS

• Type: UPoE Splitter
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt compatible Device Interface: 1 x Gigabit port 1 x Gigabit Ultra PoE in port 4-pin removable terminal block (dual DC output) Adjustable output power DIP switch (48V, 24V, 16V, 12V) LED indicator DIN-Rail mount Wall mount Grounding point Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Special Features: Hardened components rated for extreme temperatures Dual DC power output Auto-Negotiation ESD 4kV and Surge 2kV protection Power: Input: 15.4W / 30W / 60W / 95W PoE power Max. Consumption: 7W (splitter only) Max. Combined DC Output: 48V (1.25A), 24V (2.3A), 16V (2.3A), 12V (2.3A) Package Contents...
• Model #: TI-SG104

• Brand: TRENDnet
• Part Number: TI-CA3K
• Features: Hardware IP68 IK10 1.6mm SPHC hot rolled steel case FIPFG sealing Waterproof door lock 11 cable glands Wall mount Power Input: 100-240V AC Output: 200W, 55V DC 3.6A Solid wire (AWG): 12-24/14-22 Stranded wire (AWG): 12-24/14-22 18 AWG power cable included Operating Temperature -30° – 70° C (-22° – 158° F) Certifications CE FCC UL 62368 CB IEC 62368 Package Contents TI-CA3K Quick Installation Guide Wall mount accessories and power cable
• Model #: TI-CA3K

• Model #: 667372943351ate20

• Brand: TRENDnet
• Part Number: TI-E100
• Type: PoE Extender
• Color: Black
• Model #: TI-E100

• Brand: TRENDnet
• Part Number: TI-BE200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Standard Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE++ out port 1 x Gigabit PoE+ out port LED indicators Wall mount IP67 housing Data transfer rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB Certifications CE FCC IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-5 IEC 60068-2-27 (Shock) IEC 60068-2-32 (Free Fall) IEC 60068-2-6 (Vibration)
• Model #: TI-BE200

• Features: • Mount two TRENDnet TL2-FG7120 switches together in 1U/RU rack space • Includes two metal mounting brackets with screws for connecting two TL2-F7120 switches • Rack installation requires TL2-F7120 short brackets (included only with TL2-F7120) • Compatible only with TRENDnet TL2-F7120 switches
• Weight: 0.8300
• Model #: ETH-F71

• Part Number: ET91000SC2
• Type: Transceiver/Media Converter
• Specifications: Interfaces/Ports Total Number of Ports: 2 Network (RJ-45): Yes DVI: No USB: No Parallel Port: No Digital Audio: No Digital Audio/Video: No Management Port: No Number of Network (RJ-45) Ports: 1 Number of SC Ports: 1 SC Port Type: Duplex Media & Performance Media Type Supported: Twisted Pair Optical Fiber Fiber Mode Supported: Multi-mode Fiber Optic Cable Wavelength: 0 mil Maximum Distance Supported: 0.55 km Network & Communication Ethernet Technology: Gigabit Ethernet Network Technology: 10/100/1000Base-T 1000Base-SX/ LX Power Description Power Source: AC Adapter Input Voltage: 12 V DC Power Consumption: 4 W Plug/Connector Type: Type M Physical Characteristics Color Family: Black Product C...
• Model #: ET91000SC2

• Type: Antenna
• Specifications: Frequency: 2.3 ~ 2.7GHz Impedance: 50O Gain: 24 dBi (Exclude Cable Loss) VSWR(MAX.): 1.8 HPOL Beamwidth: 6 degree (3dB) VPOL Beamwidth: 6 degree (3dB) Elevation Beamwidth: 6 degree (3dB) Polarization: Horizontal & Vertical Mounting: Pole Mount F/B Ratio: 32dB Min Survival Wind Speed: 241 Km/h Standards: RoHS, WEEE Interfaces: RP-SMA
• Model #: TL-ANT2424MD

• Type: Adapter
• Specifications: Serial Port Ports: 2 Protocol: RS232 Connector: DB9 Connector - 9 Pin Male Tx FIFO Size: 256 Rx FIFO Size: 32 Operating Distance: EIA - RS232 Standard Cable: No Cable; Integrated Connector Serial Port Settings Max Baud Rate: 1,000,000 (1 MegaBaud) Data Bits: 5, 6, 7 or 8 Parity: Odd, Even, None, Mark or Space Stop Bits: 1 or 2 Flow Control: RTS / CTS, DSR / DTR, XON / XOFF Tx / Rx Modes: Point to Point Power Power Input: Power Over Ethernet OR 5 - 30V DC input, reverse polarity protected Power Over Ethernet: IEEE 802.3af Power Supply 1 Description: Optional Global Power Supply - PW-800 General Mounting Accessories 1 Description: DIN-Rail Mounting Kit - MK-048 PCB Layers: 4 Operating System Compatibility Operating Systems: Communicate with Device over TCP from any OS Microsoft Windows 10 Microsoft Windows 8 32 bit & 64 bit Editi...
• Model #: ES-457

• Type: PoE Injector
• Color: Black
• Specifications: Standards 802.3 10BaseT 802.3u 100BaseT 802.3ab Gigabit Ethernet Proprietary PoE Physical Interface 1) Gigabit Data Port (1) Gigabit Data & Power Output Port (1) IEC-320 C6 AC Connector Power Input voltage : 100 to 240 VAC Input current: 0.8A maximum for 100 VAC AC input Frequency: 47-63Hz Maximum output power: 32.8W Pin4, 5:54V; Pin7, 8: Return Temperature Range Operating: 32 degree F to 104 degree F (0 degree C to 40 degree C) Storage: -22 degree F to 176 degree F (-30 degree C to 80 degree C) Humidity (non-condensing) Operating: 5 to 90% or less Storage: 5 to 90% or less LED Indicator: 1 x Power on Green Mounting: Wall (anchors & screws included) Dimensions: 1.30" x 3.90" x 2.27"
• Parts: Manufacturers Limited Warranty: 1 Year / Parts Only
• Model #: EPA5006GP

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

• Brand: TRENDnet
• Part Number: TI-BEP200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Device Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE+ out port 1 x Gigabit 24/48V DC passive PoE out port LED indicators Wall mount IP67 housing Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB DIP Switch Adjust 24/48V DC passive voltage (default 48V DC)
• Model #: TI-BEP200

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 1.04 lbs. Power Requirements: DC 12~48V, 5A max. Unit Output Voltage: DC 54V Power Consumption: 120 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 4 IEEE 802.3at Power over Ethernet Plus Package Contents: IPOE-171-95W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-95W

• Type: Wireless LAN Controller
• Specifications: 4 RJ-45 autosensing 10/100/1000 ports 2 RJ-45 dual-personality 10/100/1000 ports 1 RJ-45 serial console port Power: 100-127 VAC / 200-240 VAC; 50 /60 Hz Mounting: MSM720 controller supports the mounting options of the 2520-8 port, including EIA-standard 19 in. Telco rack or equipment cabinet (rack-mounting kit included); horizontal surface or wall mounting. Minimum dimensions (W x D x H): 15.95 x 25.4 x 4.45 cm Weight: 1.64 kg Form Factor: Wall Mountable Rack-mountable
• Model #: J9694A#ABA

OUT OF STOCK

• Type: AC Adapter
• Color: Black
• Model #: MA-25 (1-PK)