Quick View
APC NBES0308 NetBotz Leak Rope Sensor - 20 ft.Type: SensorSpecifications: Operating Environment: 32 - 113 °F (0 - 45 °C)
Storage Temperature: 5 - 149 °F (-15 - 65 °C)
Operating Relative Humidity: 0 - 95%
Storage Relative Humidity: 0 - 95%
Dimensions: 2.76" x 6.73" x 6.34"
Weight (Approximate): 15.52 oz
Operating Elevation: 0-10000 feet (0-3000 meters)
Storage Elevation: 0-50000 feet (0-15000 meters)
Environmental Compliance
RoHS,REACH: Contains No SVHCsParts: 2 years limitedLabor: 2 years limitedModel #: NBES0308
Quick View
Ap-Ant-38 2.4/5G 8Dbi 3X3 PanelType: AntennaSpecifications: Frequency / minimum Gain:
4.9-6.0 GHz / 7.5 dBi min
2.4-2.5 GHz / 7.5 dBi min
Polarization: V, and Slant +/- 45 degree
Beamwidth:
Horizontal plane: 60 degree
Vertical plane: 60 degree
Housing: Aluminum
Radome: Plastic
Impedance: 50 ohms
Pigtails: 75cm (30") 3 x RP-SMA
Maximum Input Power: 6 watts
Operating Temperature: -45 degree C to + 65 degree C
Dimension: 1.20" x 7.50" x 7.50"
Weight: 1.20 lbs.Model #: JW016A
Quick View
Netis PS1 POE Splitter for IP Camera Wireless AP Router Voip Phone and Other Non-POE Devices | IEEE 802.3af PoE Power Output DC 12 Volt 1A and 10/100Mbps DataType: PoE SplitterColor: BlackSpecifications: Power supply pin: (1,2/ 3,6);(4,5/7,8)
Connector:
- 1 x 10/100Mbps POE RJ45 Input Port
- 1 x 10/100M male output port
- 1 x (5.5x2.1mm) DC output port
Network Medium: Cat 5e or better UTP
Standard
- IEEE 802.3 i 10 BASE-T
- IEEE 802.3 u 100 BASE-TX
- IEEE 802.3 x Flow Control
- IEEE 802.3af Power over Ethernet
Standard:
- IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
- IEEE 802.3x Flow Control
Rate: 10/100Mbps
Transmission Method: Store and Forward
LED Status: POE power input indicator light
Environment
- Operation Temperature:0°C~40°C
- Storage Temperature:-40°C~70°C
- Operation Humidity:10%~90% RH Non-condensing
- Storage Humidity:5%~90% RH Non-condensingModel #: PS1
Quick View
Tripp Lite NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector - IEEE 802.3at/802.3af, 30W, 1 Port, International Plug AdapterType: PoE+ InjectorColor: BlackSpecifications: Package Includes:
NPOE-30W-1G-INT Gigabit PoE+ Midspan Active Injector
External power supply (Input: 100–240V, 50/60 Hz, 0.75A)
(4) International plug adapters (North America, Europe, U.K., Australia)
Owner's manual
Power Consumption (Watts): 30.00
LED Indicators: Orange (Power On), Purple (PoE On)
Unit Dimensions: 1.40" x 2.60" x 5.40"
Unit Weight: 0.55 lb.
Network Compatibility: 1 Gbps (Gigabit)
IEEE Standards Supported: 802.3; 802.3ab; 802.3af; 802.3at; 802.3u
PoE Capability: 30W (802.3at)
PoE Supported Ports: 1
Side A - Connector 1: RJ45 (FEMALE)
Side B - Connector 1: RJ45 (FEMALE)
Network Switch Ports: 10/100/1000 (RJ45)
PoE Type: Type 2 PoE+ (30W, IEEE 802.3at)
Max. Power Delivered by PSE: 30.0 WModel #: NPOE-30W-1G-INT