Specifications: Item: M. 2 SSD to USB 3.1 Type A Adapter Board. Material: PCB Board. Protocol: B-Key and M-Key. Input: M.2 SSD Slot, both B-Key and M-Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
Specifications: Turn your standard USB cable into a Universal Cable
Universal / Reversible A-Male plugs in any direction
Turns a standard USB cable into a Universal Cable
Up-Angle A connector ideal in situations where space is at a premium
USB2.0 Rated
Specifications: Drive Connectors 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-A (9 pin; Gen 2; 10 Gbps) Male
Bus Type: USB 3.1 Gen 2
Chipset ID: ASMedia - ASM1351
Compatible Drive Types (Type and Rate): SATA
Drive Size: 2.5in
Interface: USB 3.1 Gen 2
Number of 2.5 inch bays: 1
Number of Drives: 1
Hot Swap Capability: Yes
Max Drive Capacity: Currently tested with hard drives up to 2TB at 7200 RPM
Maximum Data Transfer Rate : 10 Gbps
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
UASP Support: Yes
Specifications: Female USB-C to male USB-A connects your smartphone, tablet or Ultrabook to your laptop or computer.
Data transfer speeds up to 5 Gbps - 10 times faster than USB 2.0
Supports power output up to 900mA
Reversible USB-C port provides fumble-free connection
Gold-plated contacts for maximum conductivity and minimum data loss
Backward compatible with previous USB generations
Specifications: Ethernet Port
- 10/100 Mbps Ethernet
- RJ-45 Connection
USB Port
- Full Size Type-B Receptacle
- 100mA Power Draw
Environmental
- Temp 0 - 50 degree C
- Humidity 90% Noncondensing
Regulatory and Certifications
- FCC Class B, ICES-003 CE Mark, RoHS
Specifications: Standards and Certifications:
USB 3.0
USB 2.0
USB 1.1
Complies with ATA/ATAOI-100 spec v1.0 standards
SATA I, II, III
FCC
CE
EuP
WEEE
5 Gbps maximum transfer rate
Supports SATA 2.5" and enhanced-SATA drives
System Requirements:
Available USB 3.0 type-A port
Windows XP/Vista/7/8
Mac 9.x/10.x and Linux
Specifications: Max Supported Video Resolution:
HDMI: 4K x 2K (3840 x 2160) @30Hz, VGA: 1920 x 1200 (1080p) @60Hz, DVI: 1920 x 1080 (1080p) @60Hz
HDMI Specification: 1.4
HDCP Specification: 1.3
USB Specification: USB 3.1 Gen 1 (up to 5 Gbps)
Driver Required: No
Changer Type: 1 Port Metal Industrial USB to RS422/RS485 Serial Adapter
Specifications: Color: Black
Connector Type: 1 - USB B Female
Connector Type: 1 - DB9 Male
General Specifications: Dip Switch Configuration
Baud Rate: 300 bps to 921.6 Kbps
Data Bits: 7,8
Isolation: 2500 Vrms
Surge Protection: 500 Watts
Power Requirements: 5V/200mA (USB Bus Powered)
OS Support: Windows 98SE, ME, 2000, XP, 2003, Vista
Specifications: Material of Construction: PC (Plastic)
Cable Jacket Rating: VW-1
Cable Outer Diameter (OD): 3.9mm
Wire Gauge (AWG): 32 + 28
Side A - Connector 1: USB A (MALE)
Side A - Connector 2: USB C (MALE)
Side B - Connector 1: RJ45 (FEMALE)
USB Specification: USB 1.1 (up to 12 Mbps); USB 2.0 (up to 480 Mbps); USB 3.0 (up to 5 Gbps)
Driver Required: No
Recommended Category Cable: Cat6/6a
Remote Wakeup Support: Yes
Network Speed Support: 1 Gbps (Gigabit)