Specifications: Audio Specifications; DTS / Dolby Digital
Bandwidth: 18Gbps
Max Distance: 14 m / 45 ft
Video Revision: HDMI 2.0
Wide Screen Supported: Yes
Plug Type: USB Micro-B
Power Consumption (In Watts): <2.5
Power Source: Not Included (not required for standard applications)
Specifications: Wirelessly Extends an HDMI Audio/Video Signal Up to 200 m (650 ft.)
Easy no-fuss, no-mess setup with no costly cabling infrastructure
Ideal for homes, offices, digital signage applications, trade shows and anywhere else where connecting long video cables is impractical
Enhanced Technical Features
Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
Extends IR control signals that control an HDMI source from the remote display
Compatible with HDMI 1.3 and HDCP 1.2
Supports 24-bit Deep Color (8 bits per channel) and stereo audio
Supports 300 MHz/3.4 Gbps per channel bandwidth (10.2 Gbps total)
AES 128 encryption protects transmissions
Uses a 5GHz wireless frequency
LEDs indicate power, data transmission and connection status
Plug-and-Play F...
Specifications: Voltage Compatibility (VAC): 100; 110; 120; 125; 127; 200; 208; 220; 230; 240
External Power Supply Input Specs (V / Hz / A): 100-240V~50/60Hz, 0.2A
External Power Supply Output Specs (V / A): 5V / 1A
External Power Supply Cord Length (ft.): 5
External Power Supply DC Barrel Connector Specs: OD: 5.5 x 2.1 x 10mm, Positive Pin, Negative Sleeve
External Power Supply Plug(s): NEMA 1-15P North America
External Power Supply Certifications: UL; cUL
Bus Powered: Yes
Max Supported Video Resolution: 4K x 2K (3840 x 2160) @30Hz
HDMI Specification: 1.4
HDCP Specification: 2.2
Audio Specification: Supports 7.1-channel LPCM, DTS-HD and Dolby-AC3 digital audio
System Requirements:
Source device with HDMI output (Blu-ray player, cable box, laptop)
Display device with H...
Specifications: Audio Specifications: 7.1 surround Sound
Max Distance: 35 m / 115 ft
Maximum Cable Length: 114.8 ft [35 m]
Maximum Digital Resolutions: 1920 x 1080 at 60Hz
Supported Resolutions: 1920 x 1080, 1680 x 1050, 1600 x 900, 1440 x 900, 1360 x 768, 1280 x 800, 1280 x 768, 1280 × 720
Wide Screen Supported: Yes
System and Cable Requirements:
The HDMI cable connected to your video source must be longer or equal to the length of the cable connected to your display.
The maximum supported video source cable length is 82 ft. (25m).
The maximum supported display cable length is 33 ft. (10m).
LED Indicators:
1 - power LED (blue)
1 - video source LED (blue)
Max Extend Distance: CATx: 328 feet. (100 m); single-mode fiber (SFP): up to 30 km
Color: Black
Specifications: HDMI 4K video over IP
This attractively priced IP video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI 4K video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load.
Plug-and-play setup
Because the transmitter and receiver install directly into your existing LAN infrastructure, integration is easy. And you don't have to configure any IP settings. Connect your source, your display, a network switch, and you're ready go.
PoE support for remote powering
The MediaCento IPX 4K is PoE powered eliminating the need for power supplies. Using a PoE netwo...
Specifications: Video Input: HDMI (FEMALE)
Video Output: HDMI (FEMALE)
Number of Monitors Supported: 1
Video Ports : HDMI (FEMALE)
Video Ports Details: HDMI 2.0; HDCP 2.2
Supported Resolutions: 1280 x 720 (720p); 1920 x 1080 (1080p); 3840 x 2160 (4K)
Max Supported Video Resolution: 3840 x 2160 @ 60 Hz
Max. Distance (Between any 2 Units): 230 ft.
Maximum Distance with Booster: 400
Receiver/Transceiver Video Output: HDMI
Receiver - Number of Video Outputs: 1
Max Supported Color Depth: 36-bit Deep Color
HDR Support: Yes
3D Video Supported: Yes
Chroma Sub Sampling: 4:4:4
Maximum Signal Range (m): 70
HDCP Specification: 2.2
Driver Required: No
Recommended Category Cable: 26AWG STP Cat6/6a
EMI/RFI Line Noise Protection: Yes
DIN Mountable: No
Integrated/Removable Cable: No
Includ...
Specifications: Extends and Distributes HDMI/DVI A/V, Serial and IR Control Signals over Cat5/6 Cabling
Converts source video to IP-based signal transmitted to and distributed through network switch
Transmitter and receiver each extend signal up to 328 ft. (100 m) from switch for maximum distance of 656 ft. (200 m)
Transmitter and receiver can also connect directly without switch up to 328 ft. apart
Designed for Managed Network Switches with IGMP
Allows login and remote management via switch interface
Connect up to 64 transmitters and 255 receivers in single managed switch installation
HDMI output on transmitter for connecting a local display
Enhanced Technical Features
Supports video resolutions up to 1920 x 1080 (1080p) @ 60 Hz
Uses H.264 video compression standar...