Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
M/B Adapter: Digital RGB adapter 3pin (+5V,Data,NA,GND)
Input Voltage: +5V
Current (Single strip): Max. 0.84A
Current (Dual Strip): Max. 1.68A
Wattage (Single strip): Max. 4.2W
Wattage (Dual Strip): Max. 8.4W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 28 LEDs (400mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 400 x 13 x 5.5mm (15.7 x 0.5 x 0.2in)
Scope of Delivery:
2 x 400mm (15.7in)...
Specifications: Dimension (WxHxD) 347x146x141 mm / 13.66 x 5.75 x 5.55 inches
Material Powder coated steel, ABS plastic
Chassis Support Chassis with 7 open PCI slot area
PCIe generation PCIex16 Gen5.0
GPU thickness support unrestricted
GPU length support 365mm
GPU tilt angle support Vertical, tilt 15 to 30 degrees
LED lighting D-RGB LED Strip, 15 LED chips
LED max power draw 0.20A
Specifications: Chassis Support: For Phanteks NV9 Chassis
Materials: ABS Plastic, PC Plastic
D-RGB Controller Output: 7A
Product Dimension: 150.9 x 80 x 16.4mm / 5.94 x 3.14 x 0.64in
Specification: LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground)
LED strip length: 65.9 mm
Number of LEDs: 2x 5pcs
Input Voltage: +5V
Current (Single strip) Max: 0.15A
Current (Dual Strip) Max: 0.3A
Wattage (Single strip) Max: 0.75W
Wattage (Dual Strip) Max: 1.5W
Copper Base Dimension (WxDxH): 60.2 x 51 x 3.7mm (2.37 x 2 x 0.15in)
Copper Thickness: 3.7 mm
Fin Construction: 0.08 mm fin gap / 0.08mm thickness
Materials: Acrylic / POM / Copper
Aluminum Cover
Fitting: Nickel Plated Brass
Fitting Insert: ABS
Supported Tube Size Hard Tube: OD 16mm
Soft Tube: OD 16mm; ID 10mm
Tube Compatibility Hard Tube: PETG, Acrylic Tube
Soft Tube: PVC Tube
Specification: Pump Compatibility: D5 Pump (Gen3 D5 Pump pre-installed)
Installation Compatibility: 120/140 mm fan/radiator
Color: White
LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground)
LED strip length: 74 mm
Number of LEDs: 7pcs
Input Voltage: +5V
Current Max: 0.21A
Wattage Max: 1.05W
Capacity: 210 ml
Materials: Acrylic
Aluminum cover
Fitting: Nickel Plated Brass
Fitting Insert: ABS
Fill Port 1 x G 1/4
No. of Inlet 2 x M24 x P1
No. of Outlet 2 x M24 x P1
Supported tube size Hard Tube: OD 16mm
Soft Tube: OD 16mm; ID 10mm
Tube Compatibility Hard Tube: PETG, Acrylic tube
Soft Tube: PVC tube
Specifications: Chassis Support: For Phanteks NV7 Chassis
Materials: ABS Plastic, PC Plastic
D-RGB Controller Output: 7A
Product Dimension: 150.9 x 80 x 16.4mm / 5.94 x 3.14 x 0.64in
Specifications: Chassis Support: For Phanteks NV9 Chassis
Materials: ABS Plastic, PC Plastic
D-RGB Controller Output: 7A
Product Dimension: 150.9 x 80 x 16.4mm / 5.94 x 3.14 x 0.64in
Connector Detail: 24 (2 x 12) Pin Male to 24 (2 x 12) Pin Female
4 (2 x 2) + 4 (2 x 2) Male to 8 (2 x 4) Pin Female
2 (2 x 1) + 6 (2 x 3) / Male to 8 (2 x 4) Pin / Female