Specifications: Material Specification:
Al 70~88(wt%)
ZnO 15~27(wt%)
Oil 11~19(wt%)
Antioxidant 0.5~2(wt%)
Adhesiveness: 250000Cps
Thermal Conductivity: 10.2 W/m - Degree C
Thermal Impedance (Resistance): 0.015 Degree C-in2/W
Included: One syringe of thermal compound and one easy-to-spread spoon
Specific Gravity: 2.5g/cm3
Specifications: Average Particle Size:
<0.36 micron <0.000014 inch (70 particles lined up in a row equal 1/1000th of an inch.)
Temperature Limits:
Peak: -150 Degrees C to >185 Degrees C
Long-Term: -150 Degrees C to 130 Degrees C
Coverage Area:
2.7-gram syringe. (Approximately 1cc)
At a layer 0.003" thick, one syringe will cover about 22 square inches.
25-gram syringe. (Approximately 9.2cc)
At a layer 0.003" thick, one syringe will cover about 200 square inches.
Specification: Pump Compatibility: DDC
Installation Compatibility: 120 or 140 mm fan/radiator
Seal O-Ring: DuPont VITON
Reservoir - ID: 88.62 / W: 1.78
Color: Transparent
RGB LED type: Digital-RGB (addressable)
LED Number: 5050, 12pcs
LED Electricity Spec: 5V/0.45A/2.25W
Capacity: 160ml
Materials: Acrylic body, Acrylic backplate, Steel bracket
Max Water Loop Temperature: 60?
Fill port: 1 x G 1/4
No. of inlet: 3 x G 1/4
No. of outlet: 1 x G 1/4
Package Contents: 1 x PH-R160C_02
3 x Stop Fitting G1/4 (Pre-installed)
1 x D-RGB LED Board (12 Pcs LEDs)
1 x D-RGB LED cable
1 x D-RGB LED motherboard adapter
1 x Reservoir Bracket (2x Pre-installed Rubber Pad)
2 x M4x10mm bracket screws
2 x M4x6mm LED strip screws
4 x M4 x25mm pump screws
4 x fan screws
1 x 3 mm Allen key
1 x User Manual
Specification: Pump Compatibility: DDC
Installation Compatibility: 120/140 mm fan/radiator
Seal O-Ring: DuPont VITON
Reservoir - ID: 126.72 /W: 1.78 (AS049)
Color: Transparent
RGB LED type: Digital-RGB (addressable)
LED Number: 5050, 18pcs
LED Electricity Spec: 5V/ 0.7A/ 3.5W
Capacity: 200ml
Materials: Acrylic body, Acrylic backplate, Steel bracket
Max Water Loop Temperature: 60 degree C
Fill Port: 1 x G 1/4
No. of Inlet: 3 x G 1/4
No. of Outlet: 1 x G 1/4
Package Contents: 1 x PH-R220C_02
3 x Stop Fitting G1/4 (Pre-installed)
1 x D-RGB LED Board (18 Pcs LEDs)
1 x D-RGB LED cable
1 x D-RGB LED motherboard adapter
1 x Reservoir Bracket (2x Pre-installed Rubber Pad)
2 x M4x10mm bracket screws
2 x M4x6mm LED strip screws
4 x M4 x25mm pump screws
4 x fan screws
1 x 3 mm Allen key
1 x User Manual