Specifications: Application: For Digital-RGB equipped Cases, Controllers and Motherboards. (+5V, Data, NA, GND)
Color: Full RGB color spectrum
Connections:
Input: Phanteks 3-pin (female) connector
Output: Phanteks 3-pin (male) connector
M/B Adapter: Digital RGB adapter 3pin (+5V,Data,NA,GND)
Input Voltage: +5V
Current (Single strip): Max. 0.84A
Current (Dual Strip): Max. 1.68A
Wattage (Single strip): Max. 4.2W
Wattage (Dual Strip): Max. 8.4W
Cable compatibility: For Phanteks Digital-RGB LED system, For M/B Only with Digital-RGB Pin Header (+5V,DATA,NA,GND)
LED Color/ Controller: KS6812, Full Color Digital-RGB LED Chip
LED Number: 28 LEDs (400mm NEON Digital-RGB LED Strip)
MTBF: 20,000 hrs
Product Dimensions: 400 x 13 x 5.5mm (15.7 x 0.5 x 0.2in)
Scope of Delivery:
2 x 400mm (15.7in)...
Specifications: Type: 5V 3pin ARGB LED strip LED strip length: 3.3ft LED numbers: 60 LEDs ARGB cable length: 1.64ft Installation: by double side adhesive
Types: Plastic fan frame and 24 pcs addressable RGB LED Strip
Colors: Multi-Color
Length: 140mm fan frame
Specifications: To meet the rising demand from enthusiasts with keen sense of style and expressive personality, SilverStone created the FG142, a 140mm fan frame with 24 integrated addressable RGB LEDs which allows for control of each individual LED to display colors independently for nearly unlimited combination of colors and gradients. This brilliant kit can be controlled by hardware or software signals such as RGB LED control box or motherboard. With the FG142, any 140mm fan or fan mount can be turned into an RGB display source so users can freely choose the exact fan they want to use without being constrained by the limited number of RGB fan models.
Specifications: Material: Plastic fan grille and 24 pcs RGB LED Strip
Pin definition: +12V, G, R, B
Application: 120mm fan grille, LED kit
Rated Voltage: 12V DC
Rated Current: 0.48 A
Net weight: 42.00g
Dimension: 120.00 x 120.00 x 6.00mm
Specifications: Material 12 pcs addressable RGB LED with magnetic strip and adhesive tape
Pin definition:
+5V, D, G*
+5V, D, NP, G*
Included Parts:
2 x Addressable RGB LED strip
1 x Motherboard connect cable**
1 x Splitter cable
Length: 300mm
Wattage: 3W (5V, 0.6A)
Tandem limits: Depend on controller
Remark:
* Please check the control box and motherboard pin header that you want to connect are the same as LS03’s pin definition.
** Included Motherboard connect cable supports SilverStone’s addressable RGB 3pin connectors and other market standard addressable RGB 3pin (three pin in four pin housing) connectors.
Specifications: Type: 3 Strip RGB LED Control Pack
Form Factor: Slim Profile
Voltage: 12V
LED Strips: (3) RGB Magnetic LED Strip
Mounting: 6 Neodymium Magnets + 3M Adhesive
LED Lights/Strip: 12
Fans Channels: 5
LED Modes: Flash Mode (Blue > Green > Red > White > Orange > Yellow > Purple) and 256 Color Fade Mode
Buttons:
Customize Button (256 Color Mode)
Mode Button (Color Select/Flash)
Brightness Button (Adjust Brightness Levels / Power On/Off)
LED Strip Chaining Capable: Yes
Power Connector: (1) 4-pin Fan Header
Weight: 145g
Color: Black
Dimensions: 80 x 60 x 20 mm
Specifications: ADDRESSABLE LED STRIP -The LED are digitally addressable to allow you to control individual LED on the strip with supported software, provide unique lighting effects and specific colors to match any system build Synchronised control via 5V Addressable RGB header on M/B Magnetic Backing and Adhesive(3M) Strips for universal mounting options. Length: 400mm each. Addressable RGB 1-to-2 Splitter Cable allow users to extend multiple addressable RGB LED fans to build up aesthetically beautiful lighting systems