Ports: SW1 (TP1): Auto-Negotiation On/Off
SW2 (TP1): 10Mbps or 100Mbps with Auto-Negotiation Off
SW3 (TP1): Half or Full-duplex with Auto-Negotiation Off
SW4 (Fiber1): Half or Full-duplex
SW5: AutoCross On/Off
SW6 (xBFTF10xx-10x): Link Pass Through On/Off
SW7 (TP2): Auto-Negotiation On/Off
SW8 (TP2): 10Mbps or 100Mbps with Auto-Negotation Off
SW9 (TP2): Half or Full-duplex with Auto-Negotiation Off
SW10 (TP2): Monitor On/Off
Transfer Rate: 10/100 Mbps
LEDs: PWR (Power): On = connection to external power
FD (Fiber Duplex): On = Full-duplex; Off = Half-duplex
LACT (Fiber Link/Activity): On = Link; Blinking = Activity
Duplex/Link (Copper): On (Yellow) = Half-duplex Link;Blinking (Yellow) = Half-duplex Activity
On (Green)= Full-duplex Link;Blinking (Green)= Full-duplex Activity
Speed (Copper): Yellow= 10...
Features: Cable Type: Fiber OpticCable Characteristic: Patch CableFiber Optic Mode: Multi-modeCore/Cladding Diameter: 62.5/125 µmCable Length: 32.8 ftConnector on First End: 2 x ST Male NetworkConnector on Second End: 2 x LC Male NetworkFeatures: MoldedDevice Supported: Network Device,Patch Panel,Hub,Switch,Media Converter,RouterColor: OrangeLimited Warranty: Lifetime
Specifications: NETWORK
Standards and Protocols: IEEE802.3, IEEE802.3i, IEEE802.3u
ENVIRONMENT
Operating Temperature: 0 - 50 °C (32 - 122 °F)
Storage Temperature: -40 - 70 °C (-40 - 158 °F)
Operating Humidity: 10 - 90% RH non-condensing
Storage Humidity: 5 - 90% RH non-condensing
HARDWARE FEATURES
Network Media: 100BASE-Tx: 2-pair UTP/STP of Cat. 5 or above (=100 m)
Power Supply: 48 V/0.5 A
LED: PWR, Link/Act, PoE
Dimensions ( W x D x H ): 3.7 x 2.9 x 1.1 in (94.5 x 73.0 x 27.0 mm)
Wave Length: 1310 nm TX, 1550 nm RX
ANTENNA
Connector Type:
- 1 x 10/100 Mbps PoE RJ45 port
- 1 x 100 Mbps SC fiber port
Features: Converts the data between fiber (optical signal) and copper (electric signal).
Extends fiber distance up to 20 km.
The 802.3af PoE output makes remote camera deployment easier and more convenient.
WDM (Wave Division Multiplexing) technology enables to ...
Specifications: Cable Requirements: Twisted pair: CAT5 or above, shielded or unshielded;Singlemode fiber: 50-/125-µm or 62.5-/125-µm duplex
Humidity: 5 to 95%, noncondensing
MTBF: 109k hours
Operating temperature: +32 to +122°F (+0° to +50°C)
Power: From the included external 100-240-VAC, 50-60-Hz adapter;Via USB Power Adapter Cable (LHC021A) connected to a computer's USB port;From the PowerTray with a 100-240 VAC, 50-60 Hz (LHC018A-AC-R2) power supply
Storage temperature: 0 to 160°F (-20 to +70°C)
Features: • 1 x Gigabit SFP port • 1 x Gigabit PoE++ RJ45 port • Provides up to 95W for PoE, PoE+, and PoE++ compliant devices • SFP port accommodates Multi or Single Mode fiber modules • Up to 80km fiber networking distances with the TEG-MGBS80 SFP module • Operating temperature
Features: • Hardened IP50-rated industrial compact media converter
• 1000BASE-LX (1310nm) multi-mode fiber for distances of up to 1km (0.62 mi)
• 1 x Gigabit RJ45 port and 1 x SC-type interface port
• Operating temperature range of -40° – 75° C (-40° – 167° F)
• 12 – 60V DC power input with overload current protection
• 6kV RJ45 Ethernet surge protection
• Fanless design for silent operation
• Includes DIN-Rail mount and wall mount brackets
• Power supply sold separately (model: TI-M6024)
• NDAA / TAA compliant (U.S. and Canada only)