Specifications: PURELL Body Fluid Kit provides a comprehensive solution to help reduce the risk of Norovirus outbreaks. Components safely remove vomit, blood, feces and other body fluids. The included PURELL Foodservice Surface Sanitizer is effective against Norovirus, E. coli, Salmonella and more in just 30 seconds and is proven effective on most hard and soft surfaces. Body fluid kit protects staff and patrons from exposure to biohazards. Bilingual, step-by-step instructions make it easy to use. Kit is OSHA and Food Code compliant and approved for food contact surfaces (no rinse required). Plastic clam shell contains two single-use refills featuring head-to-toe personal protection and cleanup products. Kit includes a hairnet, sleeved gown, gloves, shoe covers, eye shield and mask to provide head-to-toe...
Feature: Freestanding, 7 kilograms, Plastic, false, ***1 years warranty --If the item you received has any issue please contact us for replacement, shipping fees may be paid if out of 30 days windows time.
Specifications: Interfaces
Relay
8 normally open relays (8 x 2-pole terminal block)
Contact Rating: Max 24 VDC, 2A
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A (Firmware upgrade only)
Power
Consumption 5 VDC, 10 W (Adapter); 48 VDC, 13 W (PoE, PoE 802.3 AF/AT compatibility)
Output 12 VDC, 300 mA
Specifications: Interfaces
Serial
4 x Programmable Bi-directional RS-232/422/485 Port
(4 x DB9 Male Connector, configurable via pin assignments);
Baud Rate: 300 to 115200 (default: 9600);
Data Bit: 8 (default) or 7;
Stop Bit: 1 (default) or 2;
Parity: None (default), Even or Odd;
Flow Control: None (default) RTS/CTS
Ethernet
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID: 1 x 16-segment Switch
Expander ID: 1 x 8-segment Switch
Reset Button: 1 x Semi-recessed Pushbutton
USB: 1 x USB Type A
Power: Consumption 5 VDC, 7.5 W(adapter) ; 48VDC, 9.5 W(PoE, PoE 802.3 AF/AT compatibility)