"network cable tracer"

Limited time offer, ends 06/28

• Model #: Z3#Q0656_Y

Limited time offer, ends 06/28

• Option: Network Cable Tester
• Model #: 3#Q0656_Y

Limited time offer, ends 06/28

• Model #: Q1284_O

• Specifications: Test Services: Detects IntelliTone digital signal and 1 kHz signal from analog toners. Features a CABLEMAP capability that identifies common cable miswires such as opens, shorts, and reversed pairs in twisted pair cabling. Ports: 1 x RJ-45 10/100Base-TX Network Connectivity Media: Twisted Pair Coaxial 10/100Base-TX Status Indicators: 8 LED indicators 1 Synch LED indicator Batteries: Alkaline Battery Battery Life: 20 Hour Typical Input Voltage: 9 V DC Battery Temperature: 32°F (0°C) to 104°F (40°C) Operating -4°F (-20°C) to 140°F (60°C) Storage Dimensions: 8.73" x 1.88" x 1.26" Package Contents: IntelliTone 200 Probe RJ-11 and RJ-45 patch cables Lanyard Owners CD Quick start guide 9 volt battery Additional Information: POTS telecom service available Altitude: 3000 m Operating Relative Humidity: 95 % (50 °F to 95 °F ; 10 °C to 35 °C) 75 % (95...
• Model #: MT-8200-63A

• Length: 0.5 ft.
• Model #: GB001847

• Specifications: Test Services: Fault Display High Speed Testing Generation of two tones for tracing cables and locating hidden cables Length Measurement: 15.75" to 656 ft Twisted Pair Ports: 1 x RJ-45 Status Indicators: 5 green LEDs for pairs and shield display 6 red LEDs (TONER, SHORT, REVERSED, MISWIRE, SPLIT PAIRS, and LOW BATTERY) Batteries: Alkaline AAA Features Features Auto-sleep mode Generation of two tones for tracing cables and lication hidden cables Packaging Package Contents MicroMapper MT-8200-49A Network Testing Device MicroMapper Remote Patch Cable 6-Volt Alkaline Battery User Guide The MicroMapper quickly and easily tests twisted pair cabling, giving you visibility of opens, shorts, crossed, reversed and split pairs. Just push the TEST button and MicroMapper will automatically scan all wire pairs for any existing faults...
• Model #: MT-8200-49A

• Specifications: Pro3000 Analog Toner Specifications User interface: Slide switch selects Continuity or Tone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED Solid Frequency: 1000 Hz nominal Alternating Frequency: 1000/1500 Hz nominal Over Voltage Protection: 60 Vdc in Toner/Polarity Mode Output Power in Tone Mode: 8 dbm into 600 ohms Output Voltage Level in Continuity Mode: 8 Vdc with fresh battery Battery: 9V alkaline Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C Pro3000 Analog Probe specifications User interface: ON/OFF pushbutton Volume dial Replaceable tip 3.5 mm earphone jack Battery: 9V alkaline Temperature: Operating: -20° C to 60° C, Storage: -40° C to 70° C
• Parts: 1 year limited
• Model #: 26000900

• Length: 1 ft.
• Model #: GB001836

• Model #: BE-NF-8601S

• Model #: FA9E5B03SB1

• Model #: TA046BSD605V

• Length: 0.5 ft.
• Model #: GB001829

• Specifications: Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet Auto MDI/MDI-X UTP port auto-senses network speed Switch selectable half or full duplex operation on the fiber port Fiber lengths up to 2Km 2 Power Choices - AC-DC Adapter or USB 5 LED Function lights Uses 62.5/125 or 50/125 Multimode cable Wavelength: 1310nm Supports Link Fault Pass-through (LFP) for easy tracing of network link failures Interfaces/Ports: 1 x RJ-45 1 x SC Duplex Connectivity: UTP Fiber Connectivity Media: 10/100Base-TX Category 5 UTP 10/100Base-TX Category 6 UTP 100Base-FX 50/125 µm Multi-mode Fiber 100Base-FX 62.5/125 µm Multi-mode Fiber Package Contents: N784-001-SC UTP to Fiber Media Converter 10/100 Media Converter, UTP - SC AC-DC Power Adapter ( 100-240V ) Owner's Manual
• Parts: 1 ...
• Model #: N784-001-SC

Limited time offer, ends 06/25

• Model #: 4687964314

• Type: Test Equipment
• Model #: BEKlein Tools VDV500-920

Limited time offer, ends 06/25

• Model #: 4687964315

• Model #: WSP-00096

• Model #: 586600991844

• Length: 0.5 ft.
• Model #: GB001853

• Model #: IPC-5100 Plus-s12

• Model #: IPC-5100 Plus-s6

• Type: Consumer Electronics
• Specifications: Connect 10BaseT/100BaseT UTP Ethernet to 100BaseFX Fiber Ethernet Auto MDI/MDI-X UTP port auto-senses network speed Switch selectable half or full duplex operation on the fiber port Fiber lengths up to 2Km 2 Power Choices - AC-DC Adapter or USB 5 LED Function lights Uses 62.5/125 or 50/125 Multimode cable Wavelength: 1310nm Supports Link Fault Pass-through (LFP) for easy tracing of network link failures Interfaces/Ports: 1 x RJ-45 1 x ST Duplex Connectivity: UTP Fiber Connectivity Media: 10/100Base-TX Category 5 UTP 10/100Base-TX Category 6 UTP 100Base-FX 50/125 µm Multi-mode Fiber 100Base-FX 62.5/125 µm Multi-mode Fiber Package Contents: N784-001-ST UTP to Fiber Media Converter 10/100 Media Converter, UTP - ST AC-DC Power Adapter ( 100-240V ) Owner's Manual
• Model #: N784-001-ST

• Model #: BEMT-8000

• Model #: 885814149813ASDFA237287

• Model #: WSP-00094

• Model #: U810TXU820RX-003-w1

• Model #: U810TXU820RX-003

• Length: 10 ft.
• Model #: GB001864

• Length: 0.5 ft.
• Model #: GB001841

• Model #: WSP-00093

• AC Voltage: 30-400V
• DC Voltage: 30-400V
• Analog/Digital: Digital
• Type: Circuit Tracers
• Model #: SVT00022

• Model #: BE098UTDF5

• Model #: ZZL-RNU-ASD743708

Limited time offer, ends 07/08

• Model #: Aomoproing 28

Limited time offer, ends 07/08

• Model #: Aomoproing-ZX17

• Type: Electronic
• Model #: DTPL45DV2LHG494