Speed: 1. Charge the device for 3 hours before first use. 2. Fill the 300ML water tank with warm water. 3. Select the appropriate tip and pressure setting. 4. Lean over the sink and place the tip in your mouth. 5. Turn on the device and maneuver the tip along your gumline and between teeth. 6. After use, remove the tip and rinse the device. 7. Allow the device to air dry with the tip off.
Speed: 1. Remove the tip from the handle. 2. Fill the water tank with warm water. 3. Reattach the tip to the handle. 4. Adjust the water pressure using the mode selector. 5. Lean over the sink and place the tip in your mouth. 6. Turn on the device and close your lips to form a tight seal. 7. Move the tip along your gum line, pausing briefly on each tooth. 8. After use, remove the tip and rinse both the tip and the handle. 9. Allow the unit to air dry. 10. Store the unit with the tip off and the tank empty.
Speed: 1. Fill the 300ML water tank with warm water. 2. Choose the desired cleaning mode on the smart LCD screen. 3. Attach the appropriate nozzle for the user. 4. Lean over the sink and aim the nozzle at the gum line. 5. Press the power button and move the nozzle along the gum line and between teeth. 6. After use, clean the nozzle and water tank, and allow the device to fully charge.
Speed: 1. Assemble the Home Dental Center by attaching the power toothbrush and smart water flosser to the base. 2. Charge the power toothbrush and smart water flosser using the provided charger. 3. To use the power toothbrush, wet the brush head, apply toothpaste, and choose a cleaning mode. 4. To use the smart water flosser, fill the water reservoir, select a flossing mode, and choose a tip. 5. Follow the manufacturer's instructions for recommended usage times and frequency for both the power toothbrush and smart water flosser.
Speed: Fill the 300ml tank with water, attach the nozzle securely, and charge the battery. Use one of the 4 modes for water pressure and place the irrigator tip at a 90-degree angle against teeth and gums, starting with the lowest setting. After use, rinse the unit with water, let it dry, and ensure the nozzle covers the sealing rubber ring to prevent water leakage.
Speed: 1. Fill the water tank with lukewarm water. 2. Attach the desired tip securely. 3. Select the preferred pressure setting or cleaning mode. 4. Lean over the sink, place the tip in your mouth, and turn on the device.5. Guide the tip along the gumline and between teeth, allowing water to clean each area. 6. Empty any remaining water from the tank after use. 7. Rinse the tip thoroughly and store the device in a dry place. NOTE: First-time users should start at lowest pressure setting and gradually increase over time.
Speed: 1. Fill the 300ml reservoir with water. Ensure the base cover is closed tightly. 2. Choose the desired water pressure setting (weak, strong, or pulse) using the control button. 3. Turn on the device and aim the irrigator tip at the teeth. 4. Move the tip gently along the gum line and between teeth to remove plaque and food debris. 5. After use, empty the reservoir and clean the irrigator tip and nozzle. 6. Store the device in a dry place and recharge the battery when needed. Precautions: Do not immerse the device in water. Ensure the base cover is closed tightly to maintain waterproof integrity.