Speed: 1. Fill the detachable 300ml water tank with water. Ensure the tank is securely attached to the device. 2. Select the desired cleaning mode (Low, Medium, High, or Pulse) using the control button. 3. Attach the appropriate tip to the irrigator head. 4. Turn on the device and aim the tip at the area you want to clean. 5. Move the tip slowly along the gum line and between teeth, ensuring all areas are reached. 6. After use, detach the water tank and rinse the irrigator head and tips under running water. 7. Dry the device completely before storing. 8. For optimal results, use the device daily and follow the manufacturer's recommendations for sensitive gums.
Speed: 1. Fill the 300ml reservoir with water. Ensure the base cover is closed tightly. 2. Choose the desired water pressure setting (weak, strong, or pulse) using the control button. 3. Turn on the device and aim the irrigator tip at the teeth. 4. Move the tip gently along the gum line and between teeth to remove plaque and food debris. 5. After use, empty the reservoir and clean the irrigator tip and nozzle. 6. Store the device in a dry place and recharge the battery when needed. Precautions: Do not immerse the device in water. Ensure the base cover is closed tightly to maintain waterproof integrity.
Speed: For any issues, contact RUMFFLYE’s official after-sales support team—we will resolve all your inquiries.Usage Instructions:1. Fill the 300ml detachable water tank with lukewarm water. 2. Choose one of the 8 DIY modes or 4 professional settings using the one-touch mode switch. 3. Adjust water pressure from 20-120 PSI according to your preference and gum sensitivity. 4. Place the selected tip into the 360° rotating nozzle and turn on the device. 5. Close your mouth slightly and let water flow naturally into the sink to avoid splashes. 6. Maneuver the irrigator tip around your teeth, implants, and braces, ensuring it reaches deep between them. 7. After use, remove the tip and rinse both the tip and the unit with warm water. 8. Allow the unit to air dry completely before storing it. 9. Cha...
Speed: 1. Fill the 320ml water tank with warm water. 2. Choose your preferred mode (Normal, Pulse, DIY, Soft, or Stepless) and adjust water pressure from 60 to 200 psi. 3. Place the selected nozzle tip into the water flosser and position it at a 90-degree angle to your teeth. 4. Turn on the device and move the tip along your gum line and between teeth. 5. After use, remove the tip, rinse it under water, and store it in the provided case. 6. Clean the water tank and base after each use to prevent bacterial growth. 7. Charge the device for 3 hours before first use and every 42 days of use in soft mode.
Speed: 1. Fill the 320 ml water tank with warm water. 2. Select the desired cleaning mode and water pressure. 3. Place the tip in your mouth and lean over the sink. 4. Turn on the device and close your lips to form a tight seal. 5. Direct the water stream at a 90-degree angle to your gumline, moving slowly and systematically around your mouth. 6. After use, remove the tip and rinse it under clean water. 7. Clean the water tank and any other removable parts with mild soap and warm water. 8. Allow all parts to air dry completely before storing. 9. Replace the tip every 3-6 months or as needed. 10. Charge the device for 3 hours after each use or when the battery indicator shows low power.
Speed: 1. Charge the device for 3 hours before first use. 2. Fill the 300ML water tank with warm water. 3. Select the appropriate tip and pressure setting. 4. Lean over the sink and place the tip in your mouth. 5. Turn on the device and maneuver the tip along your gumline and between teeth. 6. After use, remove the tip and rinse the device. 7. Allow the device to air dry with the tip off.