Speed: 1. Prepare the oral irrigator by attaching the tip and filling the water tank. 2. Adjust the water pressure to a comfortable setting. 3. Place the tip in your mouth and maneuver it around your teeth and gums to remove plaque and debris. 4. After use, clean the tip and water tank using the included cleaning brush and pry tools to remove any remaining residue. 5. Store the oral irrigator in a dry place to prevent bacterial growth.
Speed: 1. Charge the device for 3 hours before first use. 2. Fill the 300ML water tank with warm water. 3. Select the appropriate tip and pressure setting. 4. Lean over the sink and place the tip in your mouth. 5. Turn on the device and maneuver the tip along your gumline and between teeth. 6. After use, remove the tip and rinse the device. 7. Allow the device to air dry with the tip off.
Speed: 1. Choose the appropriate tip for your needs (classic, tongue scraper, or orthodontic). 2. Fill the 320ml tank with water. 3. Adjust the water pressure to your preference. 4. Use the oral irrigator in the shower or over the sink for effective plaque removal. 5. After use, clean the tips and the unit, and store it properly.
Speed: To use the oral irrigator, first fill the 350ml water tank. Then, select one of the four cleaning modes (gentle, normal, DIY, or powerful) using the control buttons. Place the selected nozzle tip into the water tank and position the tip in your mouth. Turn on the device and use the tip to clean your teeth and gums. After use, remove the tip and clean it, then store the device properly. For detailed instructions on adjusting water pressure, cleaning the unit, and precautions, please refer to the user manual.
Speed: 1. Remove the water tank and fill it with warm water. 2. Place the selected tip onto the irrigator. 3. Turn on the device and adjust the water pressure using the mode button. 4. Lean over the sink and place the tip into your mouth at a 90-degree angle. 5. Close your mouth slightly and turn on the water flow. 6. Move the tip along your gum line and teeth, pausing briefly on each tooth. 7. After use, remove the tip and rinse it under clean water. 8. Detach the water tank and clean it thoroughly. 9. Always store the device with the water tank detached and the tip removed. 10. Always use the device as instructed and keep it out of reach of children unless supervised. 11. Start with the lowest setting if you're a beginner or have sensitive teeth. 12. Charge using a 5V 1A adapter (adapter ...
Speed: 1. Fill the water tank with lukewarm water. 2. Attach the desired tip securely. 3. Select the preferred pressure setting or cleaning mode. 4. Lean over the sink, place the tip in your mouth, and turn on the device.5. Guide the tip along the gumline and between teeth, allowing water to clean each area. 6. Empty any remaining water from the tank after use. 7. Rinse the tip thoroughly and store the device in a dry place. NOTE: First-time users should start at lowest pressure setting and gradually increase over time.
Speed: 1. **Preparation**: Fill the 220ML water tank to the desired level. 2. **Power On**: Press the power button to turn on the device. 3. **Select Mode**: Choose from 3 cleaning modes (Soft, Normal, or Pulse) using the mode button. 4. **Use**: Place the tip in your mouth, close lips to form a seal, and tilt the irrigator to direct the water flow. 5. **Cleaning**: After use, remove the tip, rinse it, and store it in the provided case. Wipe the unit clean and store it properly. 6. **Precautions**: Do not use in water or near open flames. Keep away from children. Do not use if you have any medical conditions that could be affected by water pressure. Always follow the instructions provided with the product.
Speed: 1. Fill the 320 ml water tank with warm water. 2. Select the desired cleaning mode and water pressure. 3. Place the tip in your mouth and lean over the sink. 4. Turn on the device and close your lips to form a tight seal. 5. Direct the water stream at a 90-degree angle to your gumline, moving slowly and systematically around your mouth. 6. After use, remove the tip and rinse it under clean water. 7. Clean the water tank and any other removable parts with mild soap and warm water. 8. Allow all parts to air dry completely before storing. 9. Replace the tip every 3-6 months or as needed. 10. Charge the device for 3 hours after each use or when the battery indicator shows low power.