- Free 30-day Returns
Meet Your Seller
Phobya Thermal Pad 1.5W/mK (100x100x1mm) - 1 Piece (17045)
- These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements
- The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures
- The thermal pad equalizes the effect of irregularities from microscopic scale to visible scratches etc.
- These thermal pads are perfectly suited to equalize height differences and uneven spots on coolers and cooled elements.
- The very flexible structure and low hardness allow great adaptivity to the cooling surface even at low contact pressures.
Any questions? Ask CelesteSM will help you find out quickly.
The Phobya Thermal Pad 1.5 W/mK fills the gap between a cooler and the parts it cools, where thermal paste cannot bridge the distance: memory chips, voltage regulators (VRM), chipsets and other components that sit lower than the main die. It measures 100 x 100 x 1 mm and conducts heat at 1.5 W/mK.
Properties
- Type: Thermal pad
- Size: 100 x 100 x 1 mm
- Thermal conductivity: 1.5 W/mK
- Maximum gap: 1 mm
- Surface: Slightly adhesive
- Electrically conductive: No
Fills height differences
The pad is very elastic and has a low hardness, so it needs only little contact pressure to adapt to both surfaces. It evens out everything from microscopic grooves to visible irregularities and height differences between components, for the best possible heat transfer. Phobya rates it for gaps of up to 1 mm.
Easy to install
- The surface is slightly adhesive: the pad stays in place on the component while you mount the cooler.
- A protective film covers the pad for shipping. Peel it off before installation.
- Cut the pad to any size and shape you need.
- Electrically non-conductive, so it is safe on and around exposed components.
Where to use it
Use it on the VRAM and VRM of graphics cards, on motherboard VRM blocks and chipsets, and on larger components like north- and southbridges. As a spare in the parts box, a sheet of thermal pad saves a rebuild when a cooler goes back on and the original pads are torn.
Technical data
- Brand: Phobya
- Product: Thermal pad
- Series: 1.5 W/mK
- Dimensions: 100 x 100 x 1 mm
- Thickness: 1 mm
- Thermal conductivity: 1.5 W/mK
- Maximum gap: 1 mm
- Surface: Slightly adhesive, protective film
- Electrically conductive: No
Notes
- Choose a pad as thick as the gap, or slightly thicker.
- Phobya makes these pads in several thicknesses and sizes; check the gap on your cooler before you order.
In the box
- 1x Phobya Thermal Pad 1.5 W/mK, 100 x 100 x 1 mm (1 piece)
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory



