- Free 30-day Returns
Meet Your Seller
Phobya LED-Flexlight HighDensity 60cm - Red (72x SMD LEDs) (83131)
- The ultimate modding highlight!
- Make your PC true eye-candy!
- With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs!
- The 4-Pin Molex extension loops through the required energy and hence still allows use of the PSU connector
- In the box: 1x Phobya LED-Flexlight HighDensity 60cm Red
Any questions? Ask CelesteSM will help you find out quickly.
The ultimate modding highlight: the Phobya LED-Flexlight HighDensity strip puts 72 red SMD LEDs on 60 cm and turns a PC into true eye candy. LED technology means extremely low power consumption and hardly any heat.
Properties
- Type: LED strip, HighDensity
- Length: 60 cm
- LEDs: 72 SMD
- Color: Red
- Width: 10 mm (strip only)
- Voltage: 12 to 14 V DC
- Connector: 4-pin Molex, looped through
- Dimmable: Yes
Light in every corner
The 4-pin Molex extension loops the power through, so the power supply connector stays free for another device. Pre-applied adhesive tape on the back makes mounting easy anywhere in the case: on the inside or outside of the case, wrapped around the reservoir or along the bottom of the case.
Watertight
The strip is watertight, which opens up new ideas with a water cooling system. It can even hang inside a reservoir for a completely new look.
Cut to length
- The strip can be shortened to any length you need.
- Cut only at the cut marks (every third LED), or the last LEDs will not light up.
- With some soldering experience the strip can also be extended, even combining Flexlights in different colors.
HighDensity, TriBright
TriBright LEDs, closely spaced in high density, give extreme lighting power. The black sleeved cable integrates cleanly into high-end systems.
Outside the PC too
Light a table from below, a couch from behind or a photo frame. With an external Phobya power supply no PC is needed, and no noisy fans disturb the silence.
Quality you can see
High manufacturing quality and advanced technology make the Flexlight the ultimate lighting solution. The SMD LEDs sit on a flexible strip only 10 mm wide, so it hides easily behind panels, tubing and cable runs.
Low power, low heat
LEDs use very little power and give off hardly any heat, so a Flexlight can run right next to tubing, a reservoir or acrylic parts.
Installing a Flexlight
- Clean and dry the mounting surface.
- Peel off the backing and press the strip into place.
- Connect the 4-pin Molex to the power supply; the looped-through connector powers the next device.
Technical data
- Brand: Phobya
- Product: LED-Flexlight HighDensity
- Length: 60 cm
- Number of LEDs: 72
- Light color: Red
- Width: 10 mm (strip only)
- Voltage: 12 to 14 V DC
- Connector: 4-pin Molex
- Dimmable: Yes
- Mounting: Pre-applied adhesive tape
In the box
- 1x Phobya LED-Flexlight HighDensity 60 cm, red (72x SMD LEDs)
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory









