Pros: Light weight, quick lock adapters for drive / device mounting, long front panel cables so you dont have to stretch them (lol) to plug them in Really nice front panel metal mesh full face with foam backing to prevent dirt entry ***** stars on that - also good for EMI reduction Clean look - not fancy but not ugly Large case fan comes with on back plate - very good.

Cons: Hard foam packaging is too light and case arrived damaged - although it took a big impact on the corner. Heavier packing probably would have prevented this.

Overall Review: For the price I would use this case again As with all light weight cases - Don't lean on it or you can damage it.

Pros: It does it's job

Cons: It burnt up. The main chip gets freakin hot and it smoked - a cheap stick on heatsink would have made this last forever. 2 eggs off for the lack of a less than a buck retail heatsink, sorry.

Overall Review: I would buy this again if it was the best for the price; however, I would rip the cover off and stick on a heatsink before use. If your not willing to do that I would not purchase this unit.

Pros: My some loves these to pieces! Could not be happier. Love the fact that the unit has a desktop controller that you can plug a headset into and adjust volume with. Will buy again no problems. Fills a 100 SQFT room with more sound than I can stand at full volume - that's a plus!

Cons: No cons

Overall Review: We had the best bass response putting the large bass unit in the room corner - it made a huge difference from being on the desk.

Pros: Very fast, very very affordably for the speed and would buy larger units in the future.

Cons: Fallout 4 with high res pack and windows 10 filled this up - my bad

Overall Review: Would recommend getting a larger unit - I believe this company is making a 1 TB unit not yet released.

Pros: As a custom cabinetry / house lighting and custom PC modder I have some experience with lighting methods. I have to say these are everything I had hoped they would be. I am writing a full review of this product in hopes that others may benefit from this product. Some star points: *For entire roll runs (no cutting) both ends have the standard 4 prong female connector. The roll comes with one male/male plug. *The LED substrate is encased in a clear gel matrix. *Every 3 LED group may be cut AND the cut points are apx. 1/4 inch of bare copper (4 lands) so by cutting then removing the gel you may easily solder jumper wires - I really like this about these. *The LED reel comes shipped in a sealed foil anti-static package clearly marked in English. * Contains I remote control pad (standard unit) with battery blocker pull tab of IR type - NOT radio * I LED controller with 4-1/2 inch IR pigtail, *** Plan your controller location for this ***, with 2 x 3mm screw mounts (sans screws), power socket accepts a 5.5mm OD / 2.1mm ID tip positive plug, pigtail for LED strip is female socket. * A 5.5mm/2.1mm power pigtail of 3.5 inch wire length with ready to solder wires is included - nice!) - I don't have an ohm meter handy here but I suggest you ohm check to be sure the red wire is tip before attaching your power supply. - Regards all!

Cons: I have zero cons! Just be sure to plan for the lead time on these.

Overall Review: From other reviews I assumed that it would take time to get these and indeed it took 35 days; however, I never doubted that they would arrive. Notes: * Plan you project to include the lead time on these and you will be just fine as the product is worth it. * Total LED strip length per controller unit is not to exceed 5 meters of LED strips (does not include jumper wire lengths) - Each 3 LED group is 5 cm, so a total of 20 groups/meter or 100 LED groups in total (300 individual LED) per controller or 1 reel which is what you get here. * When using the adhesive backing the comes with this strip ensure your surface is non-porous and free of oil/moisture/dust to ensure proper adhesion. I suggest cleaning your application surface with a quality, highly evaporative solvent before applying these. For porous surface (i.e. wood) I use a multi-coat polyurethane coat fine polished with 000 or 0000 steel wool prior to LED application. * NOTE: This entire 5 meter strip requires you to provide your own 12 volt 6 amp DC power. You will not get the brightness if you do not provide a full 6 amps. * +12 volt supplied down the strip, LED RGB controlled by grounding from 3 transistors so easy to build custom controllers for these or say use these to drive a higher output multiplexer to control more total LED. * The IR controller pigtail from main board is 3 wire and can easily be extended. * the LED output is 4 wire from main board and could easily be extended prior to first LED. * Main board a has 2 controller chips and a single 1/2 inch stick on heat sink could be applied.

Pros: Sounds good, when they work

Cons: Audio cuts out, 2 feet from the transmitter - frequently - these have always been bugged. Both sets. I truly believe Corsair enjoys making garbage products. We will stay far far away from this brand in the future. Poor design. Poor QA. Consistent across their product line as of late.

Overall Review: What happened to your company? The Corsair brand used to be the earmark of high quality. Not anymore.