Question 1

What are the window panels made of? I don't want glass sides on my computer.

Accepted Answer

They are a poly carb. Not Glass

Question 2

Is it possible to mount a 6th fan on the bottom in front of the power supply?

Accepted Answer

Well you can add one but won't do much good since there is no fan holes to place it and pull air from. I don't feel its nessesary as the 2 front fans do the job well. Plus there is and extra place for a fan on top so adding that will give you extra cooling.

Question 3

I'm browsing around for a new computer case for when I decide to upgrade my computer and I was wondering how the cable management in this case was? I am currently using an OLD computer case that originally housed a motherboard with IDE ports instead if PCI-e. So you can probably get an idea where I'm getting at. Any help would be greatly appreciated.

Accepted Answer

Cable management on the Rosewill Stealth is pretty awesome actually. It has the rubber grommet cutout pieces so you can run all of your cables through the back side of the case. This is the first really nice tower I have ever owned, and I am very happy with the cable management, and extremely happy with the case overall. You can not find a better case for the money in my opinion.

Question 4

I see this case comes with fans, which is awesome, but Exactly how 
many are LEDs?

Accepted Answer

The front two are not the top two. I put a couple of red fans on top and turn them on when I'm gaming. The front two fans definitely keep it cool enough with my setup Unless I'm really multi tasking games, streams etc

Question 5

What kind of dust filters come with the case? The overview says that it comes with top, front, and bottom dust filters, but i want to know how easy they are to remove and clean.

Accepted Answer

The filters are a little tricky to remove since it is behind the fan covers. The top and front are easy to remove, but the bottom one at the back under all of the plugs (ex. under the graphics card input). The bottom filter is very thin and fragile, and make sure it must be straight when putting it back in.

Question 6

Can the LEDs be turned off?

Accepted Answer

The LED's are roswell case fans,  and yes they can be replaced with other 120 mm fans that do not have LED's. Do note though you can not turn the LED's off on the fans.

Question 7

Is the HDD dock on the top equal to a hot swap bay as in there's connectors for a bare HDD, or is it only an indent to hold a USB HDD? Sorry if this seems like a stupid question but I just want to make sure.

Accepted Answer

Never a dumb question. It's a full SATA connected dock. I've never had luck with hot swap but that's a motherboard issue. It has pre-run cables as well. Hope this helps!

Question 8

What is the maximum GPU size for this case?  I have a 10.10 x 4.38 in. GTX 970 4GB.  Would that fit?  Thanks!

Accepted Answer

And just FYI, while I'm sure that GPU will fit in this case just fine, if you plan to expand, or just want a little bit more headroom in terms of size, check out the Enthoo Phanteks Pro Full ATX case. Its about $30 USD more, bit fits 8 120mm fans (wow!) and has two spots for a liquid cooling radiator. I was totally happy with how this case (the stealth) performed, but when it came time to try and crossfire my 2 r9 Fury's I had to upgrade to something with some more room. Just letting you know.

Question 9

will this board fit into this case with enough room left ?  GIGABYTE GA-990FXA-UD3 AM3+ AMD 990FX + SB950 6 x SATA 6Gb/s USB 3.0 ATX AMD Motherboard ??

Accepted Answer

That board is the same size as the GIGABYTE GA-970A-UD3P I used last year in one of these cases, and it fit without any problems.

I don't know what all you're wanting to have enough room for, but I can say that I had a large graphics card, standard drives, power supply, heat sink, and there was plenty of space left over for cable management, etc.

Question 10

What are the dimensions of this case without the drive bays? Will my Sapphire r9 290 TriForce fit if it is just over 12"?

Accepted Answer

The HDD bays are riveted in, only the trays can be removed. However I bought another case made my IN WIN that has a gap between the HDD Bays and the 5.25 Bays that should work for you. http://www.newegg.com/Product/Product.aspx?Item=N82E16811108122

Questions & Answers