18.9X9.4 Inches Flexible RGBW LED Sheet 24V, RGB+Cool White 6500K Dimmable Cuttable Soft LED Backlight Sheet IP20, Undercounter Decorative Paper Thin Light 288 LEDs with Spacers (RGB+CW6500K)

RGBW LED sheets for backlighting, operates at 24V and emits RGBCW 6500K diammable light. SuperlightingLED colorful soft LED panel light can be used as a vibrant backlight to create an illuminated wall or glowing tabletop for a unique and elegant atmosphere. It can also be cut into letters, logos, emblems and artistic designs for creative lighting.

Specifications:

Light Color: RGB+6500K Cool White

Sheet Size: 480mm(L)X240mm(W)X7mm(H) / 18.9(L)X9.4(W)X0.3(H)

LED Chip: SMD 5050

Lumen: 20-22LM per LED at Full Output, 6336LM Max per sheet

LED Quantity: 288 LED Chips

Input Voltage: DC24V

Working Power: 70W per Sheet

Current: 3A

Cut Unit: 6 LEDs (L1.57" x W2.36")

Beam Angle: 120 Degree

Waterproof Rating: IP20

Lifespan: 50,000+hours

Warranty: 2 Years

Listing:

1 pc RGBW sheet dimmable (L18.9 x W9.4 x H0.3 inches)

2 pcs 150 mm long connecting wires

2 pcs 50 mm long connectors

8 pcs screws

8 pcs screw shims

8 pcs 8mm anti-collision silicone spacers

Please note that power transformer and dimmer are not included.

Usage and Instructions:

1.Measure the size of the board you want to paste LED backlight sheet on, and determine the size and quantity of LED sheets you need to purchase accordingly.

2.Connect LED sheet lights together by wire or connector

3.Choose right power supply and controller for LED panel sheet.

Principle: The voltage of the power supply should be the same as the voltage of LED sheet. And the driver wattage should be 1.2 times the the total wattage of LED sheets.

For example, when you need to power 4 pieces of 24V 28W LED lighting sheets, the voltage of power supply should the same, also 24V. And the total wattage of 4 pieces 28W LED sheets is 4pcs x 28W=112W. So the wattage of power supply will be 112W x 1.2=135W. (Or a little bit above)

Recommend WB5 model to adjust brightness.

4.Connect power supply and controller to LED light sheet panel, turn them on and ready for use.

Note:

1.Please operate the connection while the power is off.

2.Please make sure that the working environment is clean and dry.

3.Please kindly prepare a 24V power transformer in advance, as it is not included.

4.If you need to adjust brightness and color of this RGBW backlight LED panel, a dimmer is necessary.