Question 1

Does this work with the Supermicro X10DAL-I-O server motherboard?

Accepted Answer

There is a chart at the supermicro website which lists compatibility of this heatsink with their boards, socket type and CPUs. It says the X9 and LGA2011 will work with the P0050AP4.

/resourceapps/heatsink_matrix.aspx

You should also check to see that it all fits in your case. It is an E-ATX board and the heatsinks are large. The Rosewill ARMOR-EVO worked great for me with an X9DAE and the P0050AP4.

Question 2

What type of ILM does the SUPERMICRO SNK-P0050AP4 heatsink support?

Accepted Answer

The SUPERMICRO SNK-P0050AP4 heatsink supports a Square, Narrow ILM type.

Question 3

What are the dimensions of the SUPERMICRO SNK-P0050AP4 heatsink?

Accepted Answer

The dimensions of the SUPERMICRO SNK-P0050AP4 heatsink are 105 x 93 x 126 mm.

Question 4

I can't seem to find documentation that specifically states the fan size.  Based on the size of the heatsink itself I assume 92MM?  Can anyone confirm for sure?  Thank you in advance.

Accepted Answer

The fan is 92mm.  The fan part number on my heatsinks are: T92T12MS3A7-57.
Also, the fan can be removed/changed without removing the entire heatsink assembly.

Question 5

Is there 32mm of clearance under that fan for standard ddr4 rdimm ram if it sits over some dimm slots?

Accepted Answer

There was clearance for my heatsink ladden ddr3 aticks qhen i got this, just don't expect to be able to use a screew driver to tighten

Question 6

Is this new in non-open box and with fan included?

Accepted Answer

I received it new in packaging and with a fan included. Be aware that it's for an odd and unusual heatsink form factor; I hope you're using it for a Supermicro board.

Questions & Answers