Question 1

Will this work with a gigabyte z390 arus pro wifi motherboard? My 1st time building and it almost seems like it doesnt fit i havent applied that much pressure but from build vids i watched seems like ram just slides right in and its not in this case but dont want to push to hard.

Accepted Answer

I had the same issue with two different sets of the T-Force RAM and two different ASUS MBs.  The fit was very tight but I thought it was just my motherboards. I kept checking that the clips were unlocked and the RAM was aligned.  When I was sure the RAM was lined up okay, I really had to press firmly and they finally clicked in.  Kind of scary, but all was well.  I had to take them out to install my CPU fan and they went back in no problem the second time.  Just make sure you are stabilized from side-to-side movement when applying pressure so you don't fold it over and snap the socket like I did on my first build. ;)

Question 2

Will this work with an ASRock x370 Pro 4 and Ryzen 7 1700?

Accepted Answer

I was able to OC to 3200 with my ryzen 1600x so it is ryzen compatible. But it is only LED synced to every other mobo other than MSI. Which is my AM4 board. It should be compatible with Asrock since they are AMD chipset. But my OC is great and my PC runs so smooth. I recommend getting a 850w PSU for future upgrades on GPU. Never cheap out on PSU and RAM and you are good to go.

Question 3

Will it work if I buy 2 pack of 2 (to make it 4 stick 32gb total)?

Accepted Answer

They will be fine, it is the exact same RAM type and specs. I highly recommend an Asus Aura capable motherboard to keep the RGB synced. The Aura software alone on other mobos (I have an MSI B350 Gaming Plus) doesn't always keep them synced and occasionally crashes the RGB altogether.

Question 4

Is this ram compatible with ASUS TUF z370 Plus mobo (8th gen i3 cpu)?

Accepted Answer

Yeah any current GEN Intel board will run DDR4 no matter the make. Currently have it in an Asus Z270 Prime and works just fine, Aura sync and all.

Question 5

What is the height of the ram at the tallest point on the edges/wings?

Accepted Answer

Very tall, but I don't have the exact measurements, but I did have to cut off the tips just past the screws to get them to fit in my case.  I have my radiator mounted up top in a Themaltake Core x71 case and the Ram would not fit as the motherboard sit very close to my radiator.  The housing is made of aluminum and is easy to cut with a fine blade, I then gave it a rounded shape using a fine file.

I say this to make you aware that if your MOB sits close to the top of the case or you have a top mount rad these will need some modification on some cases, but to me the light effects you get and the faster speed of the 3200 was worth it.

Question 6

Does this come with a pack of 2?

Accepted Answer

Yes 2 sticks of 8 Gigabytes each of Ram for a Total of 16 Gigabytes

Question 7

Is there a way that I could make them one solid color? Also would it have to be paired with a ASUS motherboard? Thanks for all of the help.

Accepted Answer

You are able to make it one solid color, and it can be paired with an asus motherboard but doesn’t have to be. You just have to download the RGB software for it.

Question 8

I cant locate 4x8 or 4x16 White RGB any help?

Accepted Answer

i dont think they make a 4x8 or 4x16 i own the 2x8 versions but if you can't shell out for the extra 2, even though you dont really need to then id go for the 2 or find another brand night hawk is a relatively  small brand

Question 9

Does this ram work with Asrock RGB LED software?

Accepted Answer

Yes it does

Question 10

Will this work with a SkyTech Elite with an ASRockAB350M MoBo,without  any tweeking?

Accepted Answer

You shouldn't have any problems with it.  The ram is good with ryzen. If you want to double check look at asrocks website it has all the ram that has been tested and approved.

Questions & Answers