Question 1

Hi:  if I already have the back bracket installed from the stock heatsink from my i5 2320 cpu, can I just screw this into that bracket, or will I need to change the bracket by acessing the bottom of the motherboard? or will I need to

Accepted Answer

Your going to have to change the back bracket that comes with the new heat sink can't use the old one

Question 2

is this good enough to overclock?

Accepted Answer

I didn't think so and I ran the CPU at stock speeds. I was rather disappointed but it could be the die attach for the CPU was not good. I went with a Cooler Master 212 Hyper and even that may not be good enough for overclocking but it keeps the CPU around 60 C when running stress tests.

Question 3

Will this fit the new LGA1151 socket? (not to be confused with 1150, 1155, or 1156) (Intel "Skylake" processor)

Accepted Answer

Yes all the 115X mounting slot are the same you can use it over again if needed.

Question 4

Hello, I have an Apevia X-HERMES Case (has a huge fan on side-panel). Would this fan fit in this case?

Accepted Answer

It shows to be around 4 inches square, but there should be many better alternatives that would fit and have a much lower noise ratio.

Brand	Thermaltake
Model	CLP0556

Type	Fan & Heatsinks
Fan Size	92mm
Bearing Type	1 x Sleeve Bearing
RPM	1,900 ~ 2,300 RPM
Air Flow	39.7 CFM
Noise Level	22 dBA
Power Connector	4 Pin
Heatsink Material	Aluminum Extrusion

Fan Dimensions	0.98" x 3.62" x 3.62"
Heatsink Dimensions	2.39" x 3.77" x 3.77"
Weight	302 g

Meet Your Seller

Thermaltake CLP0556 92mm 1 x Sleeve Bearing CPU Cooler

Learn more about the Thermaltake CLP0556

Customer Reviews of the Thermaltake CLP0556

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: 9SIAFVFJCH3101