Question 1

Can you cool your gpu with it?

Accepted Answer

If you were to buy a separate water block specially for the gpu you have, then yes. This package only comes with a cpu block. Do some research for gpu water blocks and compare to what is offered in the bundle, as far as the diameters of fittings, that is. If you were to get a gpu water block that has fittings of 1/2" ID and 3/4" OD then you'd be  good.

Question 2

Hi, will this work with MSI Z170A GAMING M5 LGA 1151, I do not see the socket listed, only the LGA 1150, is the 1151 same series?
Thank you
Bonnie Swanson

Accepted Answer

This will work on a LGA 1151 also. The mounting holes are the same between the 1150 and 1151. Anything that will work on the 1150 will also work with the 1151 when it comes to cpu coolers.

Question 3

Will this fit in a Corsair 760t? id like to keep it in the case at the top

Accepted Answer

The kit Comes with 120mms fans. I'm not sure what size your case currently has but, as long as you can fit 2 q30'll fans side by side in the top then you shouldn't have any issues. Also, the reservoir is easily mounted anywhere inside or on the back of the case. I actually mounted mine on the extra expansion slots with 2 simple brackets I purchased from the craft drawer at Home Depot.

Question 4

will this fit in the fractal design define s?

Accepted Answer

I just looked at the case you are talking about and. I don't know. I highly doubt it. I had to get the biggest corsair case just to fit the radiator in. After retuning the nzxt phantom because the radiator wouldn't fit in there. Trust me the whole cooling system is huge

Question 5

is this for am4 am3+ or am3 ?

Accepted Answer

Am3+ am4 bracket is not included but you can buy off of there website

Question 6

Would this system be able to cool an Intel Core i7-5930K and a ecga titan x hydro video card?

Accepted Answer

Yes, however I would look for a different option. I had to return this kit because the reservoir was leaking, seems like a few other people had the same issue.

Question 7

I was wondering if you can put this on the outside of your case?

Accepted Answer

I assume you mean the pump/res combo.  Yes, you may need some additional tubing but it all depends on how far you have to go.  I ended up running mine internally but i have to do some fancy footwork to get it to fit..  It is very large and easily conflicts due to its tall stature.  Also, make sure the case has through holes for running your tubing.   Do make sure you measure!  It is a wonderful setup and i am very happy with it, but the pump/reservoir is EXTREMELY difficult to fit in my very large (phanteks enthoo primo LE) case.  If I were to do it all over again, i probably would go with a separate pump and reservoir.  If it fits your needs though, its a great setup and a great starter.  Im running mine with 2 radiators....  its overkill but my computer is silent.

Question 8

Will this support  LGA1151 Cooling? it states all of them except this one.. Have anyone tried??

Accepted Answer

Yes, I'm using it on a Core i5-7600K with a Z270 motherboard.

Question 9

Can this cooling kit be mounted in APEVIA X-DREAMER4 Series X-DREAMER4-BL Black / Blue Steel ATX Mid Tower Computer Case?

Accepted Answer

I would say no, the radiator is really thick, add fans to it and it's even bigger.

Question 10

What are some sites that could aide with assembling this together since there is no manual?

Accepted Answer

Look up a custom loop tutorial on youtube there all the same for the most part.

Questions & Answers