Pass Through RJ45 Crimp Tool Kit with Tester for Cat6/Cat5e Ethernet | 50 Cat6 pass-through connectors, 50 boots, cutter, stripper, ties and spare blades; supports RJ11/RJ12 for home networks

Gen 3 Flush Cut CrimpingUpgraded RJ45 pass through crimper trims wires flush to the connector face in one action. Precision 8P8C/6P6C die helps press pins evenly for clean Cat6 and Cat5e terminations. Spare blades are included for long-term use.
Beginner-Friendly Pass Through DesignPass-through connectors let wires extend out the front, so you can check the color order before crimping. T568A/B wiring guide is printed on the tool, making the kit easier for DIY network repairs, home wiring, and camera cable setups.
Includes 50 Connectors and BootsComes with 50 Cat6 pass-through RJ45 connectors and 50 strain relief boots. The connector design helps guide wires smoothly into place, while the boots help protect cable ends from bending and daily wear.
Durable Tool Body and Clean HandlingBuilt with high-strength carbon steel, a reinforced frame, locking pin, non-slip grip, and all-metal ratchet mechanism. The kit also includes a yellow mini wire stripper and 6-inch diagonal cutting pliers for Ethernet, copper, and aluminum wires.
Complete Ethernet Crimper KitIncludes RJ45 crimp tool with spare blades, network and telephone cable tester, 6-inch diagonal pliers, mini wire stripper, 50 Cat6 connectors, 50 boots, 6-inch screwdriver, and 100 nylon cable ties. 9V battery for tester is not included.

Can this RJ45 crimp tool be used for Cat5e and Cat6 Ethernet cable projects?
Yes. This RJ45 crimp tool works with Cat5e and Cat6 cables for home networks, office wiring, routers, camera wiring, DIY repairs, vehicle network wiring, RGB LED upgrades, and RV or marine network projects.
Is this crimper beginner-friendly for making Ethernet cables at home?
Yes. The pass-through design makes it easier to insert, align, and check wires before crimping. For a clean crimp, follow the T568B wire order, push the cable jacket fully in, crimp firmly, and test with a cable tester.
Does this RJ45 crimping tool cut off the extra wires?
Yes. When used with pass-through RJ45 connectors, the tool crimps the plug and trims excess wire ends during crimping, helping create a clean cable end and reducing manual cutting steps.
How do I know if the Ethernet cable was crimped correctly?
A good crimp should have a firmly attached RJ45 plug, cleanly trimmed wire ends, and the cable jacket held inside the connector. Use a network cable tester to check that all 8 wires pass in the correct order.
Can I use this tool for standard non-pass-through RJ45 connectors?
Yes. This RJ45 crimp tool can be used with pass-through and standard non-pass-through RJ45 connectors, including STP and UTP Ethernet cable projects. Pass-through plugs also help check wire order and trim excess wire ends.

Can this RJ45 crimp tool be used for Cat5e and Cat6 Ethernet cable projects?
Yes. This RJ45 crimp tool works with Cat5e and Cat6 cables for home networks, office wiring, routers, camera wiring, DIY repairs, vehicle network wiring, RGB LED upgrades, and RV or marine network projects.
Is this crimper beginner-friendly for making Ethernet cables at home?
Yes. The pass-through design makes it easier to insert, align, and check wires before crimping. For a clean crimp, follow the T568B wire order, push the cable jacket fully in, crimp firmly, and test with a cable tester.
Does this RJ45 crimping tool cut off the extra wires?
Yes. When used with pass-through RJ45 connectors, the tool crimps the plug and trims excess wire ends during crimping, helping create a clean cable end and reducing manual cutting steps.
How do I know if the Ethernet cable was crimped correctly?
A good crimp should have a firmly attached RJ45 plug, cleanly trimmed wire ends, and the cable jacket held inside the connector. Use a network cable tester to check that all 8 wires pass in the correct order.
Can I use this tool for standard non-pass-through RJ45 connectors?
Yes. This RJ45 crimp tool can be used with pass-through and standard non-pass-through RJ45 connectors, including STP and UTP Ethernet cable projects. Pass-through plugs also help check wire order and trim excess wire ends.

Meet Your Seller