Tripp Lite 2000W Power Inverter / Charger with Auto-Transfer Switching, APS 12VDC 120V, Hardwired (APS2012)
- Delivers clean 120V AC power from AC or DC power source
- 2000W continuous output power; 4000W peak power
- Auto-transfer switching option for UPS operation
- Protects against blackouts, surges and EMI/RFI line noise
- Rugged polycarbonate housing resists moisture and impact
Any questions? Ask CelesteSM will help you find out quickly.
Tripp Lite's APS2012 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 120V AC power from any 12V battery or automotive DC source. OverPower TM inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost TM inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 25/100 amp charging system. Supports an unlimited amount of runtime with any number of user-supplied batteries connected.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Limited Warranty period (parts): 1 year
- Limited Warranty period (labor): 1 year
- Read full details
Return Policies
- Contact Manufacturer for Assistance
- This item is covered by Newegg.com's Manufacturer Warranty Only Return Policy.
- Read full return policy for details.
Manufacturer Contact Info
- Manufacturer Product Page
- Manufacturer Website
- Support Phone: 1-773-869-1111
- Support Website
- View other products from Tripp Lite
The Tripp Lite APS2012 is a hardwired 12V DC-to-120V AC inverter/charger with automatic transfer switching, 2,000W continuous inverter output and a 25A/100A selectable charger. It suits stationary or vehicle and marine setups that need backup power for equipment compatible with its 16.6 ms transfer time.
Recommended For
- RV and marine owners with a properly sized 12V deep-cycle battery bank who want hardwired AC power for appliances, lighting, or equipment, plus battery charging when shore or generator power is available.
- Fleet, emergency-vehicle, and construction crews who need a permanently installed inverter to run tools, pumps, or portable lighting from a vehicle or auxiliary battery system.
- Users building an extended-runtime backup system who want the inverter to pass through utility or generator power, charge a user-supplied battery bank, and switch to battery power during an outage.
- Remote-site operators who have a compatible 12V battery setup and need hardwired 120V AC for equipment such as lighting, pumps, or general-purpose tools where generator fuel or noise is undesirable.
Spec Summary
| Attribute | Value |
|---|---|
| Best For | Vehicle or stationary backup-power setups that need 120V AC from a 12V battery or AC line, automatic line-to-battery transfer, and battery charging |
| Power Input And Battery Charging | Accepts 12V DC battery input and 120V AC line input; DC input is rated at 192A at full continuous load, while AC input is rated at 38A with full inverter and charger load. Integrated 3-stage charger offers selectable 25A or 100A charging for wet or gel batteries |
| Output Capacity And Overload Support | Provides 2000W continuous AC output in inverter mode and 2400W in AC mode, with 4000W peak output. Double Boost supports startup loads up to 200% of the continuous rating for up to 10 seconds; OverPower supports up to 150% for 1–60 minutes under ideal battery and temperature conditions |
| Output And Transfer | Provides 120V AC output from AC line or 12V DC battery power, with 12V DC battery-charger output. Automatic line-to-battery transfer takes 16.6 ms for UPS protection of equipment compatible with a one-cycle transfer time |
| Waveform And Frequency | Pure sine wave output at 60 Hz |
| Installation And Construction | Hardwired input and output with protected bolt-down battery lugs for heavy-gauge wiring; moisture-resistant construction for vehicle or marine use in humid environments |
| Operating Modes And Indicators | Three-position switch provides AUTO transfer, CHARGE-ONLY, and SYSTEM OFF modes; six front-panel LEDs indicate AC/DC operation, overload, DC voltage, shutdown, and system faults |
| Physical Details | Black unit weighing 42 lb |
| Model Identifiers | TRIPP LITE APS2012 |


