Tycon Systems POE-MSPLT-USB POE To USB Converter - 48V DC POE Input

The line of dynamic splitters are compact Power over Ethernet adapters which splits the Data and PoE power onto separate output connectors and converts the active PoE (IEEE802.3af/at) input into a regulated DC output voltage. The DC output is provided on a standard 5.5 mm./2.1 mm. barrel connector and the Data output is provided on standard RJ45 network connector, each on a dedicated 6 in. cable. In addition to being compatible with 10/100MB Ethernet speeds, inputs and outputs are isolated and the devices include protections for short circuit and overload. The unique provides a USB output to power smartphones and tablets from PoE devices like network switches or PoE injectors.

• Very Compact Size
• Converts an Active PoE Input to a DC output
• Output Power Up To 15W
• Short Circuit, Over Current Protection

• Output Voltage - 5VDC USB
• Output Current - 3A
• Output Power - 15W
• DC Output Connector - USB Socket
• Output Cable Length - 6 in.
• Load Reg & Noise - 5%
• Line Reg & Ripple - 1%
• PoE Input (RJ45) - IEEE 802.3af/at or Passive PoE (36 - 60VDC)
• Ethernet Speed - 10/100MB
• Efficiency - 75% Min
• EMC Standards - FCC Class B NE55022 Class B
• Isolation Voltage - 1500VDC
• Isolation Resistance - 100m Ohms Minimum
• Operating Temperature - 25 to +50°C
• Operating Humidity - 5% - 90% non-condensing
• Storage Temperature - 40 to +80°C
• 5.5 x 2.1 connector