52933-3X200 Tire Pressure Sensor 315MHz for Hyundai Elantra 2011-2013

• OE Number: 52933-3X200
• The mainly function is to monitor tire internal pressure and allow you know the tire condition.
• Good accuracy and sensitivity, enhance safety of your vehicle.
• A perfect aftermarket replacement, directly replace your old one.
• This is a non-OEM product, accessory only!

• Material: Plastic, Metal
• Color: Black, Gray
• Frequency: 315MHz
• Thread Diameter: M8x0.8 KEY_TAB
• Batch 1 Size: 7x5.5cm /2.76"x2.17" (L*W)
• Batch 2 Size: 7x6.8cm / 2.76"x2.68"(L*W)

• for Kia Rio 2012-2016
• for Hyundai Tucson 2014-2015
• for Hyundai Elantra 2011-2013
• for Hyundai Elantra Coupe 2013-2014

Note:

• Remove the original tire pressure sensor and install the new one;
• After installation, please park the car and turn off the engine for about 20 minutes, and keep the remote control key 5 meters away from car;
• Then start the vehicle and keep it running at a rate of 25 km/h above for 5--10 minutes to match the TPMS sensor;
• If the outdoor temperature is below 0, the matching time may be longer, that is normal. Please wait patiently for the matching. If you still have problems, please contact when you are free.
• New or old batches will be sent randomly.

• 1 x Tire Pressure Sensor

• Step 1: Remove the tire and the original tire pressure sensor/valve; (the whole tire needs to be removed)
• Step 2: Install the newly purchased product;
• Step 3: After the product is installed, please stop the vehicle and turn off the engine for about 20 minutes, and keep the remote control key 5 meters away from the vehicle;
• Step 4: Start the vehicle and keep the vehicle running at a speed of more than 25 km/h for 5 to 10 minutes, then the product should be matched;
• Step 5: If the temperature is low, such as, below 96°C, the matching time may be longer, which is normal, please wait patiently for the matching. If you still have problems, please contact us.