

Get the Rain Glass Look for your windows at a fraction of the cost!

Frenshen up your home style with VELIMAX rain glass window film!
Suitable for all kinds of flat and smooth glass surfaces.

Breathe New Life Into Your Home with VELIMAX Various Decorative Window Films!
How to remove the air bubbles?
Use a plastic card to squeegee air bubbles and water. If it's hard to get rid of the bubbles, uncover the window film, spray more water between the glass and the film and squeegee firmly again. Water will make it much easier to remove bubbles.
Any tips to peel off the protective liner?
Attach 2 pieces of transparent tape to the front andback surfaces of a corner of the film. Press the 2 pieces of tape firmly together, then quickly pull them apart to begin separating the clear liner away from the static side of the film.
Can I remove the film at a later stage?
Absolutely. Our blackout film is removable and reusable. You can just simply peel the film off the glass in seconds with no mess.
Why the film fall off after a while?
Please check if you have removed the liner, trimmed the edges or queegeed excess water and bubbles. Leave a 1/16” wide gap around the four perimeter edges of the film. This gap is essential for the proper thermal expansion of the glass.

Get the Rain Glass Look for your windows at a fraction of the cost!

Frenshen up your home style with VELIMAX rain glass window film!
VELIMAX
RAIN GLASS WINDOW FILM
The film is designed to give a beautiful appearance of rain patterned glass to your windows and doors, whether for some privacy, to block out an unsightly view or for decorative purposes.
Besides prevent UV rays, it can also cut out a large proportion of the unwanted glare, whilst still allowing natural light to pass through. It will work on any smooth glass surface and can be used anywhere in the home, requires no additional cleaning and can be installed at a fraction of the cost.
Static Cling
NON ADHESIVE IS NEEDED.
The rain glass film is made of a non adhesive vinyl material which adheres to smooth nonporous glass surfaces with ease. As it is non adhesive, the static window cling can be removed in seconds without leaving any residue at any time.
Easy Installation
2.5cm x 2.5cm GRID BACKING
We upgraded the backing by adding black grid lines onto it to make the cutting easier. Please note that the smallest unit on the backing film is a square with a side length of 2.5 centimeters.
Environmental
CAN BE REUSED MULTIPLE TIMES
It can be easily removed, re-positioned and reused. When you don't need to use it, you can carefully roll up the film and store it in a clean cardboard box in a dark place.
GIVE YOUR HOME PRIVACY
Provide additional privacy while still allowing natural sunlight to enter.
ADD STYLE TO YOUR HOME
Freshen up your windows and create a relaxing atmosphere to your home.
SUNGLASSES FOR YOUR HOME
Block out harmful UV rays and protect your furnishings from aging and fading.
GRID LINER FOR CUTTING
Measure Glass?Clean Glass?Cut Film?Remove Liner?Spray Water?Hang Film?Squeegee Film?Trim Edges
Suitable for all kinds of flat and smooth glass surfaces.

Breathe New Life Into Your Home with VELIMAX Various Decorative Window Films!
![]() Rain Glass Window Film | ![]() Clear Waters Window Film | ![]() Pure Silk Window Film | ![]() Reeded Glass Film | ![]() Lattice Window Film |
|---|---|---|---|---|
| Customer Reviews | ||||
| — | — | — | — | — |
| Price | ||||
| — | — | — | — | — |
| Pattern | ||||
| Rain Glass | Running Waters | Silk | Frosted Reeded Glass | Frosted Lattice |
| Privacy Level | ||||
| semi | semi | semi | semi | semi |
| Non Adhesive | ||||
| ? | ? | ? | ? | ? |
| Reusable | ||||
| ? | ? | ? | ? | ? |
| Anti-UV | ||||
| ? | ? | ? | ? | ? |
How to remove the air bubbles?
Use a plastic card to squeegee air bubbles and water. If it's hard to get rid of the bubbles, uncover the window film, spray more water between the glass and the film and squeegee firmly again. Water will make it much easier to remove bubbles.
Any tips to peel off the protective liner?
Attach 2 pieces of transparent tape to the front andback surfaces of a corner of the film. Press the 2 pieces of tape firmly together, then quickly pull them apart to begin separating the clear liner away from the static side of the film.
Can I remove the film at a later stage?
Absolutely. Our blackout film is removable and reusable. You can just simply peel the film off the glass in seconds with no mess.
Why the film fall off after a while?
Please check if you have removed the liner, trimmed the edges or queegeed excess water and bubbles. Leave a 1/16” wide gap around the four perimeter edges of the film. This gap is essential for the proper thermal expansion of the glass.

































































