Meet Your Seller
VIVO Blue 250ft Bulk Cat6 Copper Indoor LAN Ethernet Cable Wire UTP Pull Box
- Cable Type: Cat6 bulk ethernet cable, 250ft roll, connector free. Suitable for Fast, Gigabit, and 10-Gigabit Ethernet
- Material: Solid Pure Copper 23 AWG, conforms to TIA/EIA
- Solid UTP: 4-pair unshielded twisted pair cables for economic use, CM (In-Wall Rated)
- Easy Spool Box: Ideal for network installation. For indoor use, patch cables, crossover cables
- Color: Outside jacket comes in a blue finish
Any questions? Ask CelesteSM will help you find out quickly.
Cat6 UTP (unshielded twisted pair) PURE COPPER 23 AWG bulk ethernet cable in easy to use pull box is ideal for your network installation. Case contains 250 ft of wire with blue jacket. This cable is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) and 10GBASE-T (10-Gigabit Ethernet). It comes in its own spool box and is connector free, giving the user the freedom to customize the length, wiring, and application.
WARRANTY:
30 Day WarrantyAPPLICATIONS:
- For indoor use - Patch cables - Crossover cables - Other network installationsTECHNICAL DATA:
- CM (In-Wall Rated) - 4-pair unshielded twisted pair - 250 FT Cat6 - Up to 550 MHz - 23 AWG solid pure copper - Conforms to TIA/EIA - Transfer Rates of 10/100/1000 MbpsWarranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by VIVO Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
VIVO’s 250-foot Cat6 bulk Ethernet cable is a connector-free indoor wiring supply for installers and DIY network builders who need solid 23 AWG pure-copper cable for Fast, Gigabit, or 10-Gigabit Ethernet runs.
Recommended For
- Homeowners wiring several rooms or fixed desk locations can pull custom-length indoor runs from the 250-foot box and terminate them to wall jacks or a patch panel.
- DIY network installers who need to choose cable lengths and wiring at the job site can use the connector-free pull box to make custom indoor runs.
- Small-office or home-lab builders setting up permanent Ethernet links between a wiring area and multiple workstations can use the solid-copper bulk cable with compatible jacks or patch-panel terminations.
- Installers planning indoor Ethernet runs who want solid copper rather than copper-clad aluminum can choose this model’s stated pure-copper conductors.
Real-World Use Scenarios
- During a home renovation, run cable from a central network location to wall jacks in rooms used for work, streaming, or gaming; after termination, those devices can connect to the router or switch over wired Ethernet instead of relying on Wi-Fi.
- When adding a ceiling- or wall-mounted Wi-Fi access point, pull a run from the network switch to its planned location; the access point can use a wired network connection rather than relying on a wireless backhaul, once the cable is terminated and connected.
- For an indoor security-camera installation, pull separate cable runs from the network area to camera locations; with compatible PoE equipment, a run can carry both network data and power, avoiding a separate power connection at each camera.
- When wiring several rooms or work areas in a small office, use the pull-box cable to make custom-length runs to network jacks; this lets a switch connect stationary computers and other wired devices without depending on individual pre-made cable lengths.
- For a DIY network installation, draw cable through indoor routes and cut each run to fit, then add compatible connectors or terminate it at jacks or a patch panel; the cable ships without connectors, so it is suited to custom installations rather than plug-and-play use.

























