Watercool MO-RA IV 200 - Black Radiator, 200mm, G1/4, 75mm, Copper (26200)

An external radiator for 200 mm fans, 75 mm thick, with copper tubes, aluminum fins and a black powder-coated sheet steel housing. The Watercool MO-RA IV 200 - Black has two G1/4 ports and comes with its fan frame 200, fan splitter included. Watercool presents it as a stylish small form factor solution for smaller systems.

Properties

• Fans: 200 mm, fan frame 200 in the box
• Size: 300 x 452 x 75 mm
• Thickness: 75 mm
• Ports: 2x G1/4
• Material: Copper tubes, aluminum fins, steel housing
• Capacity: Approx. 0.81 liters

An external radiator for systems that run around the clock

Watercool calls the MO-RA IV the ultimate solution for cooling-intensive systems such as overclocked gaming computers, workstations or servers that are in use around the clock. Watercool also says this monster radiator, with its modular design and versatile expansion options, sets new standards in terms of cooling performance and workmanship quality.

Optimized fins and 5 bar stable

For improved performance, Watercool adapted the fin geometry to the current generation of fans. Corrugated fins give an optimized airflow across the entire speed range and more mechanical stability. Since there is no substitute for surface area, the MO-RA IV 200 has 1.7 square meters of aluminum in it.

A raised pre-chamber ensures better pressure distribution. Water runs through 4 parallel rows of pipes, a total of 80 pipes with a total pipe length of 21 m. The connection terminal is made of solid brass and is now firmly soldered to the pipe geometry. Both ensure increased mechanical load capacity at the connection terminal and a pressure stability of up to 5 bar. All MO-RA IV radiators are pressure tested before delivery.

What the loop needs

On top of the scope of delivery below, the two G1/4 ports mean you have to add two fittings for your tube. The fan frame takes 200 mm fans; Watercool's instructions show the Noctua NF-A20, which needs short M4x10 screws.

Technical data: MO-RA IV 200

• Internal material: Copper tubes, aluminum fins
• Housing material: Powder-coated sheet steel
• External dimensions (L x W x H): 300 x 452 x 75 mm
• Weight: Approx. 6 kg
• Pressure tested: 5 bar
• Surface: Black powder coated
• Connection: 2x thread G1/4 inch
• Capacity: Approx. 0.81 liters

Notes

• Contamination from production may remain in the radiator, so Watercool recommends rinsing it with clear water prior to first use.
• Screws used on the radiator may not penetrate deeper than 8 mm into the heat exchanger; longer screws might damage the pipes.
• Watercool recommends demineralized or deionized (distilled) water with a suitable corrosion inhibitor as coolant, or Heatkiller Fluid as a ready-mixed coolant, and names Innovatek Protect and Aquacomputer Double Protect too.

In the box

• 1x MO-RA IV 200
• Mounting screws for fan mounting
• Fan frame 200 including fan splitter