What Does This Product Do?

WL-WN570HA1 Outdoor Point To Point CPE is designed to WISP CPE solutions and long distance wireless network solutions for video surveillance and data transmission. It features up to 1000mW wireless transmission power and has a built-in 12dBi directional dual-polarized antenna which provides an efficient way to pick up and maintains a stable signal for a wireless network connection ranging multiple kilometers. It was so great soultion for your wireless request!

Description

The AC600 AP/Router is mainly used for providing free WiFi service in big area such as factory, community, street or etc.
The AP/Router can take an existing 2.4GH z or 5GHz wireless signal, repeater and extend it to a longer range where it is too far away for the router or access point to reach.
Build-in High Power Technology. Support Repeater, AP, router Mode.
Features up to 1000 mW of power and enhanced receiver design.
Robust weatherproof casewithstands harsh outdoor conditions.
Build inlighting arrester. Support 3 LEDs wireless signal strength.

Bullet Description

High Power and External Dual Polarization Antenna: With high transmission power up to 30dBm/1000mW and external dual polarization directional dual-band antenna, WL-570HA1 gets a perfect performance in long-distance.
Dual Band

With combined wireless speeds of up to 2.4GHz 300Mbps and 5GHz867Mbps, Simple tasks like sending e-mails or web browsing can be handled by the 2.4GHz band while bandwidth-intensive tasks like online gaming or HD video streaming can be processed by the 5GHz, high transmission power breaking down the barries of WiFi Passive PoE: Passive power over Ethernet (POE) Support for Flexible Deployment.

Note: Select the Wi-Fi network with a signal strength greater than 70% for the most reliable connection.

Security and Flexible
Provides WEP, WPA/WPA2. WPA-PSK /WPA2-PSK data security, ethernet (POE) Support for Flexible Deployment Multiple

Operation Modes

WL-570HA1 supports AP, Router, WISP as operation modes. And under AP Router mode, it provides Access Point, Client, Client+Repeater modes for various wireless solutions.

Multiple Operation Modes
Wireless Access Point: Covert a wired network to a wireless network, which allows you connect laptops, tablets, phones or other WiFi devices.

Wireless Router: Create an instant private wireless network and share Internet to multiple WiFi device.

WiFi Range Extender: Extend WiFi coverage of an existing wireless network.

WISP

Built-in High Power Amplifiers

Independent high power amplifiers provide significantly increased output power, which is up to 5x transmission power. Enhance existing Wi-Fi coverage; Get internet everywhere and eliminate WiFi dead zones.

Withstand Harsh Outdoor Climates

IP65-rated weatherproof housing that ensures continued operation in climates of extreme cold, heat or continuous moisture; Robust weatherproof case withstands harsh outdoor conditions;Withstanding broad ranges of humidity and temperature (-30°C~70°C) (-22°F~158°F); 15KV ESD, 4KV lightning protection, ensure stable connection in harsh outdoor conditions.

How it work?

1. Place the straps through the slots on the back of the AP/Router and then around the pole Tighten the straps

2. Connect one end of an LAN cable to the POE port of the provided Power injector and the other end of the LAN cable to the LAN port of the AP/Router.
3. Connect the LAN port of the power inject t a PC using another LAN cable.
4. Plug the power adapter into a wall socket.
5. The connection will be similar to the figure below after the above steps are finished.

Package Content

1 x WiFi AP/Router
2 x Antenna
1 x power Adapter
1 x POE Converter
1 x RJ-45 Networking Cable
1 x Main body holder
1 x Screw fitting
2 x Cable ties
1 x Quick Installation