Specification of Lightweight PLA Filament:

Diameter / Weight: 1.75mm / 1KG

2 Available Colors: Natural, Black

Printing Temperature: 190-270?

Recommended Heated Build Platform: Textured Paper, PVP Solid Glue, PEI

Printing Cautions:

• 1. Note that the first layer speed setting is consistent with the actual printing speed, set to 100% of the actual printing speed, turn off the first layer, small area printing speed reduction function, the first layer extrusion rate is consistent with the actual foaming extrusion rate, such as 270°C Set the first layer extrusion rate to 45%; if the bottom plate adhesion is too strong, you can set the bottom valve when printing;

• 2. Pay attention to the maximum work temperature of the printer. Most Teflon tube printers cannot work for a long time above 250°C. Long-term printing above this temperature may cause clogging. If the temperature exceeds 250°C, metal throat are required for printing;

• 3. Yellowing of printed models after high temperature foaming is a normal phenomenon, and lowering the printing temperature can alleviate it;

• 4. Since the lightweight PLA foams continuously in the melting cavity of the high-temperature nozzle, the retraction basically does not work, so stringing is normal when nozzle crossing outline. It is recommended to print the vase mode airplane model to reduce the influence of the stringing on the model.

• 5. Foaming ratio is related to temperature, printing speed, nozzle melting cavity size, Please set wall thickness, adjust extrusion rate/temperature/speed and other parameters by comparing different models according to your own printing situation.

Please Notice:

• The picture shown is a representation of the item, color may vary slightly due to the color setting of each individual monitor. Please double check the size and color before purchasing.