
2400 mAh solar security light with A15ft cable

180° & 72feet Flood light motion sensor is more sensitive

Solar motion security lights lamp heads and motion sensor heads are adjustable


Note:
- We do not recommend installing the camera on the opposite side of the security light. Because infrared rays directly irradiated or reflected the sensor head will also cause the security light to not work properly. If you still want it to be installed, there should be at least more than 27.5 inches of space between the camera and the product for the best performance.
- Make sure to position the solar panel where the sunlight is sufficient and available.
- The motion sensor is less sensitive if in a radial movement (vertical direction), and it is more sensitive if in a lateral movement (horizontal direction). Recommended to be installed at 7.2-10.5ft above ground.
- After adjusting the motion sensor, tighten the sensor head nut to prevent water from entering the motion sensor.
2400 mAh solar security light with A15ft cable

180° & 72feet Flood light motion sensor is more sensitive

Solar motion security lights lamp heads and motion sensor heads are adjustable

3 Convenient Operational Modes
Auto mode
Light comes on at night or in dimly lit environments when detects motion and lights up between 10s-120s(max).
3 Convenient Operational Modes
Normally on mode
Push the switch to "ON". The light stays on about 50mins after a full charge.
3 Convenient Operational Modes
Test mode
Quick-adjust and test the light before installation. The light turns on for 7s in daytime or night.
Energy-Saving Solar Flood light
Flood light is powered by a monocrystalline silicon solar panel, and turns into electricity. No need for electricity anymore and save your money on electricity bills.
Reliable Enduring Aluminum Design
Cast in die-cast aluminum for the motion light outdoor has good heat dissipation, which is more enduring. The security light with a long life rating of up to 50,000 hours.
Super Bright LEDs for Security Light
Security Light is powered by a well-made LED lamp bead as the source enables its brightness, and a professional optical-designed filter lens provides soft light and anti-glare.

Note:
- We do not recommend installing the camera on the opposite side of the security light. Because infrared rays directly irradiated or reflected the sensor head will also cause the security light to not work properly. If you still want it to be installed, there should be at least more than 27.5 inches of space between the camera and the product for the best performance.
- Make sure to position the solar panel where the sunlight is sufficient and available.
- The motion sensor is less sensitive if in a radial movement (vertical direction), and it is more sensitive if in a lateral movement (horizontal direction). Recommended to be installed at 7.2-10.5ft above ground.
- After adjusting the motion sensor, tighten the sensor head nut to prevent water from entering the motion sensor.

































