Question 1

How many fan supports does it have?
I know it says it support 1x 80mm fan but is there room for more fans?

Accepted Answer

The case is nice for small slim build , fan support out the box just 1 80mm u could do 2 but it would go where CD Rom is  and it be kinda pointless , get a 1 nice 80 that is quite  and good are flow . They way the case works it. Everything in the case air rises is how it's set up  if u want more in take get a cooler master Geminiii. It's a every good cpu cooler and the side has events for air so the fan for your cpu would get cold air from kit said and act as in take

Question 2

How many Hd's or SSD's could one fit inside this case?

Accepted Answer

The HDD area will only accommodate 1 3.5 inch HDD.  With an adapter bracket you could probably stack 2 2.5 inch notebook drives or SSDs into the space, but I would not recommend to 2.5 inch HDDs because of possibility of heat build-up.

Question 3

Will a Athena Power AP-MFATX35 fit in this case? If not, how can I upgrade the PSU?

Accepted Answer

You cannot upgrade the ps unless you find one small enough. I tried the ps I was upgrading to was wider than the case

Question 4

i want the psu model number so I can check out what peoples tests on the net say I was told to research the psu of all cases like this?

Accepted Answer

1)  Case manufacturers often switch out the model of bundled PSU between mfg batches or minor iterations.  That makes it difficult to research these PSUs even in theory.
2)  Unless you have a mid- or high-end discreet GPU, 300W is more than enough for you.  One thing to keep in mind is that these PSUs rarely have more than 2 SATA cables, so if you have more than 1 HDD and 1 optical drive, you *might* need an adapter.  I rarely use anything but integrated graphics, and I've always had luck with bundled PSUs.  In fact, the only PSUs I've had trouble with were a la carte!

Questions & Answers