Vszerda USB 3.0 HDMI Dual Monitors 4 Computers KVM Switch, Supports EDID, 4K@60Hz HDMI Dual Monitor Switch for 4 PCs with 3 USB3.0 and Audio Microphone Ports, 4 Port hdmI KVM Switch for 4PC

USB 3.0 4 Port HDMI + HDMI Dual Monitor KVM Switch 4K@60Hz for 4 Computers

4 computers share one set of keyboard, mouse and dual monitors, USB 3.0 ports, microphone and audio port;

installation steps:

1. Insert the DC/5V adapter into the KVM ;

2. Plug the HDMI cable into the KVM and monitor;(Output)

3. Plug the HDMI cable and USB cable into the KVM and your computer/laptop (HDMI cables are not included)(Input)

HDM1 IN1 A + HDM1IN1 B + USB IN1=PC1

HDM1 IN2 A + HDM1IN2 B + USB IN2=PC2

HDM1 IN3 A + HDM1IN3 B + USB IN2=PC3

HDM1 IN4 A + HDM1IN4 B + USB IN2=PC4

4. Insert the mouse and keyboard into the KVM switch

5. If needed, you can connect a microphone and audio port

With Simulation EDID

This KVM dual monitor switch can simulate the EDID of the display, and store the resolution and refresh rate of the display, it comes with EDID emulators in each input port, keeping PCs always having correct display information.

4K@60Hz for extended and mirrored display

Note: Only when both your computer Graphics card and monitor support 4K@60Hz then you can get 4K@60Hz effect.

3 Port USB 3.0 interface with 5Gbps

Supports 5Gbps data transfer speed , can transfer files in Seconds.

3 USB 3.0 ports, share USB devices such as keyboard mouse scanner, printer, flash drive, etc.

Separate Audio and Microphone Output

This HDMI dual monitor KVM switch comes with a 3.5mm Audio Jack port with a DAC chip inside, which can be insert

2 Switching Modes:

Quickly switch between the 2 computers with just one click of the switch button on the panel or use the wired remote controller.

What's in the Box:

1 x USB 3.0 KVM Switch 2 Monitor 4 Computers

4 x USB 3.0 a-b Cables

1 x switch button cable

1 x 5V adapter

1 x User manual