Heavy Duty Material & Rust Protection
- Heat-treated Cr-V Steel (40-48 HRC)
- Fine Polished Surface with Electrophoretic Coating
Long Lasting Cuts
- Induction hardened
- High-frequency heat treated
- For more cutting capacity (55-65HRC)
Ergonomic Up-Grip
- TPR Material
- Not only slip-against but also soft
Wire cutting
Fastening
Clamping
Features
1. High quality materials
2. Labor-saving design
3. Non-slip grip
4. Strong cutting force, shear hardness HRC 60-62 degrees
5. Maximum shear capacity:
8-inch pliers: copper wire 3mm/0.118in, iron wire 2.0mm/0.078in, steel wire 1.5mm/0.059in
6-inch pliers: copper wire 2mm/0.078in., iron wire 2.0mm/0.078in., steel wire 1.5mm/0.059in
7. Widely used: can cut steel wire, copper wire, iron wire and other common metals, strong bite force, can easily reverse effectively fixed or loose screws and nuts
Material
Clamp body: carbon steel
Handle: TPR rubber
Specifications
8 inches (w x l) 2.16 x 8.07 in / 5.5 x 20.5 cm
Weight: 8.32oz / 236g
6 inches :(width x length) 2.16 x 6.49 in / 5.5 x 16.5cm
Weight: 5.25OZ / 149g
Package including
8-inch needle-nose pliers x 1
6-inch nose pliers x 1
Matters needing attention
1. Use within the applicable shear range
2. Do not use needle-nose pliers as percussion tools
3. It is strictly forbidden to use ordinary pliers for live operation. Please choose telecom pliers for live operation
4. When cutting tight wires, take protective measures to prevent the wires from being shot
5. This product is coated with anti-rust oil when leaving the factory, so that the surface looks stained or used, please be careful to buy
6. Storage conditions: please keep in a dry environment, wipe with a dry cloth after use, and coat with anti-rust oil to avoid rust
Gifts for the Craft Lovers
Gifts for the Gardening Lovers
Gifts for the Barbecue Lovers
Heavy Duty Material & Rust Protection
- Heat-treated Cr-V Steel (40-48 HRC)
- Fine Polished Surface with Electrophoretic Coating
Long Lasting Cuts
- Induction hardened
- High-frequency heat treated
- For more cutting capacity (55-65HRC)
Ergonomic Up-Grip
- TPR Material
- Not only slip-against but also soft
Wire cutting
Fastening
Clamping
Features
1. High quality materials
2. Labor-saving design
3. Non-slip grip
4. Strong cutting force, shear hardness HRC 60-62 degrees
5. Maximum shear capacity:
8-inch pliers: copper wire 3mm/0.118in, iron wire 2.0mm/0.078in, steel wire 1.5mm/0.059in
6-inch pliers: copper wire 2mm/0.078in., iron wire 2.0mm/0.078in., steel wire 1.5mm/0.059in
7. Widely used: can cut steel wire, copper wire, iron wire and other common metals, strong bite force, can easily reverse effectively fixed or loose screws and nuts
Material
Clamp body: carbon steel
Handle: TPR rubber
Specifications
8 inches (w x l) 2.16 x 8.07 in / 5.5 x 20.5 cm
Weight: 8.32oz / 236g
6 inches :(width x length) 2.16 x 6.49 in / 5.5 x 16.5cm
Weight: 5.25OZ / 149g
Package including
8-inch needle-nose pliers x 1
6-inch nose pliers x 1
Matters needing attention
1. Use within the applicable shear range
2. Do not use needle-nose pliers as percussion tools
3. It is strictly forbidden to use ordinary pliers for live operation. Please choose telecom pliers for live operation
4. When cutting tight wires, take protective measures to prevent the wires from being shot
5. This product is coated with anti-rust oil when leaving the factory, so that the surface looks stained or used, please be careful to buy
6. Storage conditions: please keep in a dry environment, wipe with a dry cloth after use, and coat with anti-rust oil to avoid rust