Question 1

does this come with a power supply?

Accepted Answer

Mind did not, there may be a deal, but I highly suggest buying the 2 separately,  usually the psu is really bad with combos.

Question 2

Would you say this case is quiet?

Accepted Answer

Pretty much so yes, on start up it can make noise, but that goes away street a few moments... under a heavy load it can, but 9/10, it's silent or not much worse than any other case.

Question 3

What is preventing me from using a 280mm Radiator? It has support for two 140mm fans...

Accepted Answer

In response to this, I bought the WolfAlloy recently and figured out why the 280mm will not work. It is the proximity of the radiator to the motherboard processors and heatsinks. The radiator would be too close (hitting in a bad way) the motherboard.

Question 4

So I noticed that this is orange in color, but I read in “the way it looks” that the LED’s are red, either is that true, or it is possible to replace them with red?

Accepted Answer

The grill is actually painted orange.  The LEDs behind the orange grill are red.  I haven't removed the front panel so I can't tell you if you could easily change the grill color or not.  The overall appearance of the orange grill with red LEDs is more orange than red.

Question 5

What are the actual dimensions of this case?

Accepted Answer

8 5/8 inches wide
20 inches deep
19 1/8 inches high

Question 6

What is a good intel motherboard to use that will accommodate all the fans?

Accepted Answer

Any board that has 4 or 5 system fan pins/headers. You will not find this on a Micro ATX or Mini ITX board. Go ATX. Depends on what cpu socket you go with. However, you don't need to have all the pins on the motherboard to use all of the fans. You can hook them directly up to your psu or if you are very fancy to a fan controller. I have 2 hooked up to my motherboard, and 2 to my psu via molex connections.

In short if you insist on using a motherboard for your fan headers, you will want to filter your results to an ATX mobo. I can't specify beyond that because I don't know what cpu socket you are going for (I. E. lga 2011, 2011 v3, 1150, 1151 etc).

Question 7

Can anyone confirm that the orange mesh plate on the front is removable? I'd like to paint it blue, if possible.

Accepted Answer

Yes you can remove the orange mesh plate. It's held in place by 8 screws.

Question 8

Looking to install a top internally mounted 240 mm sealed liquid cooling system in this case will this actually work with a larger sized motherboard? I only ask because I see pictures of what looks to be a 240 mm radiator but I don't see the fans on it.

Accepted Answer

It's a tight fit for mine, with the RAM installed, but it does work, just need to install one before the other, if I remember correctly I installed RAM first to be able to click it down

Question 9

is there a dust filter for the front fans besides the orange mesh?

Accepted Answer

Yes, there are removable dust filters in front of the two fans in the front and another removable dust filter on bottom of the case.

Question 10

For the front USB 3.0 ports. Do the USB 2.0 ports work without hooking the 3.0 ports up to the MOBO? I'm going to have the case a bit before I have a few other things so was thinking about throwing my current rig into this case for now.

Accepted Answer

yes

Specifications
Model Name	WolfAlloy
Type	ATX Mid-Tower
Color	Black
Case Material	Steel
Motherboard Compatibility	ATX, Micro-ATX, Mini-ITX
Dimensions	8.66” x 18.11” x 18.90” (W x H x D)
Weight	19.18 lbs

Expansion
External 5.25" Drive Bays	2
Internal 3.5" Drive Bays	8(0)
Internal 2.5" Drive Bays	0(8)
Expansion Slots	8

Cooling System
120mm Fans	2 x Front (Orange LED) (pre-installed) 2 x Top (optional) 1 x Rear (pre-installed) 1 x Bottom (optional)
140mm Fans	2 x Top (1x pre-installed, 1x optional) 1 x Rear (optional) 1 X Bottom (optional)
Liquid-cooling Support	240 mm Radiator on Top

Brand	Rosewill
Model	WolfAlloy

Type	ATX Mid Tower
Color	Black
Case Material	SPCC
With Power Supply	No
Motherboard Compatibility	Micro ATX / ATX / Mini-ITX
Side Panel Window	Yes

Rosewill ATX Mid Tower Gaming Computer Case, support VGA card length up to 340mm, come with four fans-2 x Front 120mm Fan, 1 x Rear 120mm Fan, 1 x Top 140mm Fan - WolfAlloy

Learn more about the Rosewill WolfAlloy

Customer Reviews of the Rosewill WolfAlloy

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

External 5.25" Drive Bays	2
External 3.5" Drive Bays	No
Internal 3.5" Drive Bays	8(0)
External 2.5" Drive Bays	No
Internal 2.5" Drive Bays	0(8)
Expansion Slots	8

Max GPU Length	310 mm
Max CPU Cooler Height	175 mm
Dimensions (H x W x D)	18.11" x 8.66" x 18.90" (bezel included)
Weight	19.18 lbs.

Item#: N82E16811147242