RAIDMAX Altas ATX-295WBP Black Steel / Plastic ATX Mid Tower Computer Case 500W Power Supply

Pros: This is a great budget case. It's really sturdy and it also comes with a 500W power supply so there really is no reason to not buy this case.

Cons: None.

Pros: Good Price for both a PSU and a Case. Fast Shipping! Would make for a great Budget Build.

Cons: Piece of plastic... Bad shipping, found a few of the legs were broken... Fast shipping, but cheap.

Pros: Nice case for the price other than the cheap psu with a really short 4/8 pin cpu line. I could not rout it under my HD 7770

Cons: PSU is weak and should be used in a top mount case due to short cable length

Pros: It is still decent case for a price, but you may find something better.

Cons: I've been buying this case for years now. Recently the design was updated and in fact they just cut a lot of corners with a new design. No Front fan anymore, Some panels were removed making cable mangement more difficult. Even back slots for expension cards were removed and now you just need to brake off a piece of metal to install expesnion card.

Other Thoughts: Overall it was a cool, good looking and well ventilated case before, now it is just a simple case. Nothing special. It's a shame that price reamins the same.

Pros: Tons of air flow.

Cons: None yet, could use a temporary filter for top.

Pros: Amazing ventilation; lots of places to mount case fans.
Big case with lots of room for a full ATX motherboard.
LOTS of drive bays; four 5.25" optical drive mounts, four 3.5" hard drive mounts.
Tool-less installation of drives; uses latches to lock in place.
Decent PSU included.
Sharp and powerful looking design.

Cons: 8-pin CPU cable is a bit short.

Other Thoughts: I was looking to begin an upgrade to my PC, which was a store-bought Mini-ITX PC with a limited 220W PSU. Unfortunately, since the PC did not have a slot for a motherboard connection plate (the holes for the ports were drilled into the case), I could not continue using my current case.

I got this case because it seemed like it had lots of room and a decent prepackaged PSU. The case is big enough for a full ATX motherboard and has amazing airflow. There is room for two 240mm fans on the top and another 240mm fan on the side of the case, and the case itself supports liquid cooling, so if you intend to overclock your processor or GPU, you will be able to keep your system ice cool. Two USB ports, one being 2.0 and the other 3.0, are included on top, giving you easy access to plug in a mobile device or external storage.

The only real problem I felt is that the 8-pin CPU cable is a bit short, and it may take a bit of a stretch to connect it depending on your motherboard.

Other than that, I feel there is no better value for your buck; it combines a built in power supply which saves money and is actually decent at what it does, it has amazing ventilation with the capacity to add in even better cooling, and it has tons of room to accommodate a large motherboard and a large amount of optical and hard drives. Definitely look into this for your system!

Pros: Cheap, durable, nice looking, lots of space. etc.

Cons: NONE

Other Thoughts: LOVE IT!!! LOVE NEWEGG!!

Pros: this is a great case it is somewhat bare but leaves lots of room for improvement and customization and the power supply works also the usb 3.0 port is a nice touch

Cons: if your looking for a nice power supply case bundle ror a cheep price this is it however i would recommend replacing the power supply it certinly isnt the worst but having a good relyable brand name power supply is important because if it ails it can take other components with it.

Pros: Plenty of room, came with lots of extras to hide wires, stand-offs already in place and fit my ASRock 990FX Extreme3 motherboard perfectly! Lot's of places to mount fans!

Cons: The screwless bay setup was odd, cumbersome, and did not work that well. I ended up just taking them off and using the screws that came as extras to mount my drives. So I'm taking off an egg for that reason.

Pros: -lots of room with a micro ATX board
-mesh side and front make the case run very cool, never heats up
-tool-less design that actually works well
-small enough that all cables run without stretching and can be managed well

Cons: -original power supply is weak and died out 1 year after purchase. also, needed to get a 4 pin exterder because the MOBO power cable was short
-mesh side means the case needs to be cleaned... alot. i mean it. dust will eat this thing alive if you dont keep it nice. not a problem for me, but it would be nice if it stayed clean longer
-dust cover on bottom vent below PSU mount is pointless as the PSU vents OUT through that port, so filtering the dust upon exit is pointless.
-cable management could be better (looks like they added more room since i got mine. my back pannel is flat, the one in the picture has a dome in the non mesh side

Other Thoughts: if you need a good case for a micro ATX, you found your match. i reccomend this case often, and it is beautiful if you install some LED lights. the light hits the mesh and lights my desk space just right. if you hate cleaning your Case 2 times a month, dont get this case. if you are like me and clean it that often already, it wont be a problem. just get ready to buy a few cans of duster. my case has never had anything get above 45C while playing games on steam, and i only have 3 120mm fans and my stock CPU fan. this case sheds heat off like nothing. its roomy and everything fits without a problem.
took 1 egg off for dust (i expected it to be dustier than usual) and semi cramped cable management. decided not to dock for cheap PSU as its not really a problem. (worked great for a year) you should never trust pre installed PSU's anyway.