CORSAIR DOMINATOR GT 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 2133 Desktop Memory with Airflow Fan Model CMT8GX3M2B2133C9

Pros: I was very surprised at how much these sticks of ram weighed, much heavier than the G-skill ram I had in earlier. Very high quality. I installed the 2 sticks of Dominator GT 8GB ram, Bios was already set to the XMP1 profile. booteded up fine to 2133MHZ with no problems, ran memtest and it passed fine....VERY HAPPY....

Cons: A little pricy but you get what you pay for

Other Thoughts: Have not tried to overclock, thats next, but do not see the need to.
I7 2600K @ 4.8 GHZ
8 GB Dominator GT ram
Z77X-UP4 TH
XSPC Raystorm cpu H2O block

Pros: Timings are kinda loose, but you can tighten them up with ease. Was able to get the Ram up to 2400 on first pass with very little modifications to them. They'll reach 2600 with some skill & work flawlessly. They run cool when OC'd, no need for the fan.....

Cons: Fan included ran up price....

Other Thoughts: Dominator lives up to the name

Pros: Upgraded processor to i7-3770K on Asus Sabertooth Z77 and added this second set of memory. Set the memory to XMP in the BIOS and was off and running even faster that before.

Cons: None.

Pros: Actually right now I don't have any pros. Very disappointed with this product

Cons: Does not run specs at 1.5v as advertised. Using 2600k with ASUS sabertooth. This kit needs a minimum of 1.60v to run advertised specs. I bought these specifically for the 1.5v rating. I searched the forums and lots of folks have the same result, needs more voltage than advertised. Not happy at all.

Other Thoughts: I've had rock solid results with Mushkin and Gskill. Corsair is a lottery ticket. You might get lucky but I think their quality control is poor. Their products are expensive compared to others and I expected much better.

Pros: This ram runs at 2133 speed when using an amd fx 8150 and an asus 990fx motherboard. I had to set up the proper timings and set the ram to 2133 but you only need to do that once. This ram is very easy to water cool, because you don't have to take off the entire heat sink, merely unscrew the top of the heat sink off. Several companies make water blocks specifically for the Dominator line.

Cons: none

Other Thoughts: I was very disappointing with how long it took for my ram to get to me. I payed 3 dollars extra for rush shipping and it still took 3 days for them to ship my ram. They were packaging the ram for two days?!?! That's not corsair's fault though.

Pros: Booted first time on my X79-UD3 with xmp profile 1 setting it to 2133mhz no probs 100% stable on win7 64bit. Fans are just awesome! Keeps your sweet Dominator GTs cool as a cucumber + they looks awesome with dual fans (i bought 2 kits) on either side of the X79 cpu setup :P I love this ram

Cons: No cons this is the ram to buy.

Other Thoughts: I shoped around for a while, this was seemingly to me the Fastest ram with the lowest latency at the best price, so i bought 2 kits for 16gb. Highly recomened. :D

Pros: good quality

Cons: its not compatible with gigabyte G1 sniper 3

always blue screen, send the ram to rma corsair and send me new one but same problem

dont buy this ram if u have G1 sniper 3

Manufacturer Response:

Dear customer,

We're sorry that you're having a hard time with our memory, we would like to ask you to contact our Tech Support so that we can help you get this issue resolved.

Thank you,
Corsair Customer Support

External Link(s):

Corsair Tech Support|

Pros: Runs at 2133MHz and stays cool with the included silent fans.

Cons: None!

Other Thoughts: i7 2700K on Asus Sabertooth Z77
Gigabyte GTX 670
OCZ 256gb Vertex 4

Pros: good quality i like corsair

Cons: Without X.M.P Start Computer After 15-20 min Always Blue Screen And I
Tried X.M.P. Profile #1 would not boot. Does not work as

Manufacturer Response:

Dear Customer,

We're sorry you're having trouble setting up our memory kit. Please contact our Tech Support and we'll help you get things set up.

Thank you,
Corsair Customer Support

External Link(s):

Corsair Tech Support|

Pros: Was able to return them.

Cons: Would not load XMP Profile.
Did not run at 2133mhz @ 1.5v @ 9-11-10-27. In fact the label on my sticks said 9-11-9-27. Corsair told me to run them at 1.65v and it should fix my problem. However I bought these for the exact reason they are spec to run at 1.5v. If I need to run them at 1.65v I would buy 1.65v spec memory. Returning these and buying Muskin 1.5v