SUPERMICRO Extended ATX Server Motherboard Dual LGA 2011 - MBD-X9DRD-IF-O
Based on the Intel C602 chipset, the SUPERMICRO MBD-X9DRD-IF-O server motherboard supports dual Intel Socket R (LGA 2011) Xeon CPUs and up to 256 GB DDR3 ECC Registered memory, delivering stunning computing power to deal with your most demanding applications. One PCIe 3.0 x16 slot and four PCIe 3.0 x 8 slots provide substantial I/O bandwidth for current and future needs. 8x SATA II and 2x SATA III ports with RAID support allow flexible storage solution. 2x Gigabit Ethernet LAN ports enable bottleneck-free data transfer. This motherboard really benefits your workstation business with the unmatched configuration flexibility, upgrade capability and data protection.
Product SKUs |
MBD-X9DRD-iF-O |
X9DRD-iF (Standard Retail Pack) |
Physical Stats |
Form Factor |
E-ATX |
Dimensions |
10.3" x 13" (26.2cm x 33.0cm) |
Processor/Cache |
CPU |
- Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP **)
|
Note |
† BIOS version 3.0 or above is required |
Note |
** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
Cache |
Up to 30MB |
System Bus |
QPI up to 8 GT/s |
System Memory |
Memory Capacity |
- 8x 240-pin DDR3 DIMM slots
- Up to 512GB DDR3 ECC LRDIMM
- Up to 256GB DDR3 ECC RDIMM
- Up to 64GB DDR3 ECC/non-ECC UDIMM
|
Memory Type |
- 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
|
DIMM Sizes |
32GB, 16GB, 8GB, 4GB, 2GB, 1GB,
64GB LRDIMM |
Memory Voltage |
1.5 V, 1.35 V |
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
On-Board Devices |
Chipset |
Intel® C602 chipset |
AHCI SATA |
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1, 5, 10
|
SCU SATA |
SATA 2.0 3Gbps with RAID 0, 1, 5, 10 |
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers |
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
Video |
Matrox G200eW |
Input / Output |
AHCI SATA |
- 2x SATA 3.0 ports (6Gbps)
- 4x SATA 2.0 ports (3Gbps)
|
SCU SATA |
4x SATA 2.0 ports (3Gbps) |
LAN |
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
|
USB |
9 USB 2.0 ports total
(4 rear + 4 via header + 1 Type A) |
Video |
1 VGA port |
Serial Port / Header |
2 Fast UART 16550 ports (rear/header) |
DOM |
1 DOM (Disk on Module) power connector |
TPM |
1 TPM 1.2 20-pin Header |
Chassis (Optimized for X9DRD-iF) |
1U Chassis |
- CSE-813LT-R500CB
- CSE-813T-441CB
|
2U Chassis |
- CSE-823TQ-653LPB
- CSE-825TQ-600LPB
- CSE-825TQ-R740LPB
|
Important Chassis Notes |
- To support the new generation Intel® Xeon® processor-based motherboards, Revision M chassis is recommended. Please talk to your sales representative for details.
- Please use optional I/O shield MCP-260-00041-0N in Supermicro 1U chassis
|
SuperServer(s) with X9DRD-iF |
Model(s) |
- SYS-6017R-TDF
- SYS-6027R-TDARF
- SYS-6017R-TDAF
|
Expansion Slots |
- 1 (x16) PCI-E 3.0 slot
- 4 (x8) PCI-E 3.0 slots
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)
|
System BIOS |
BIOS Type |
128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS rescue hot keys
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
Management |
Software |
- SuperDoctor® III
- Watch Dog
- NMI
- IPMI 1.5 / 2.0
|
Power Configurations |
- ACPI / APM Power Management
- CPU Fan auto-off in sleep mode
- Power-on mode for AC power recovery
|
PC Health Monitoring |
Voltage |
- Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, 4 Memory Voltages.
- 5+1 Phase-switching voltage regulator
|
FAN |
- 8x 4-pin fan headers
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED |
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
|
Operating Environment |
Operating Temperature Range |
10°C - 35°C (50°F - 95°F) |
Non-Operating Temperature Range |
-40°C - 70°C (-40°F - 158°F) |
Operating Relative Humidity Range |
8% - 90% (non-condensing) |
Non-Operating Relative Humidity Range |
5% - 95% (non-condensing) |