Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Interface: IDE to SATA
Cable Length: 18.11" (460mm)
Features: Converts IDE Devices (Hard Drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc…) to Serial ATA Connection
Supports ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, and IDE Devices
Compliant with ATA Specifications
Compliant with Serial ATA Gen 1.0
1 IDE Input Port
1 SATA Output Port
Specifications: Supports USB-type mSATA SSD
Transparent to any OS
Does Not Require Any Driver
Can be Configured as a Bootable Device
mini USB Female
Complies with Serial ATA 1.0A Specification (SATA Mode)
Supports SATA III Host Interface
Supports Hot Swap
Complies with USB 2.0 Specification (USB Mode)
Compatible to Intel-type mSATA SSD (mSATA Interface)
Compatible to USB-type mSATA Device (mSATA Interface)
Features: Unique bi-directional SATA – IDE converter
Supports 3.5-inch SATA and IDE (ATA) hard drive
Supports 5.25-inch SATA and IDE (ATA) optical drives
Power-On and HDD-Activity LED indicators
Ultra low power consumption
Connectors: one IDE (ATA) connector, one SATA host connector (Yellow), one SATA device connector (Black) and one 4-pin FDD power connector
Two independent Ultra ATA channels with 128/256 bytes buffer per channel
Driverless. No driver is needed
Serial ATA Interface
Complies with SATA 1.0a specification
Supports SATA Generation 1 with transfer rate up to 1.5Gbps (150MB/s)
Supports Spread Spectrum in receiver
Supports SATA power saving mode: Partial and Slumber
IDE (ATA) Interface
Complies with ATA Specification
Complies with Ultra ATA 133 with transfer rate up to 133MB/s
Supports PIO mode o, 1, 2, 3, 4, 5, ...
1 x 40 pin IDE connector for host connection
1 x 7+15pins Serial ATA port for SATA hard drive
1 x 4-pin power connector
Features: Converts IDE connector for Serial ATA Drive
Compatible with Ultra ATA 100/133 with Data transfer rate up to 1.5 Gbps (150 MB/s)
No Driver required
Supports SATA devices such as CD/DVD Drives, CD/DVD Burners....)
Supports up to 2 channels & 2 devices
With no Jumpers, makes it easy for configuration
Specifications: Cable Length: 24"
Connector Types: 1 - DB9 Male
Internal Ports: 1 - 9 pin IDC (Motherboard Header) Female
Number of Ports: 1
Card Type: Low / Standard Profile
Max Baud Rate: 115200 Kbps
Data Bits: 7, 8
Stop Bits: 1, 2
Parity: None, Odd, Even, Space, Mark
Bus Type: USB 2.0
Chipset ID: FTDI FT232R
Microsoft WHQL Certified: Yes
OS Compatibility: Windows 98/ 98SE/ 2000/ XP(32/64bit)/ Server 2003(32/64bit)/ Vista(32/64bit)/ 7(32/64bit)/ Server 2008 R2, Windows XP Embedded/ CE 4.2/ CE 5.0/ CE 6.0, Mac OS 8, 9, 10.4.x/ Linux 2.4, 2.6
Perfect for system builders looking to add legacy functionality to newer motherboards that lack an integrated RS232 port
Connect, monitor and control industrial/automotive sensors and equipment
Connect bar code scanners, receipt printers and other serial devices...
Features: Ensure smooth data flow from either your DB9 male serial port.
This adapter cable connects to the motherboard or i/o adapter via flat ribbon cabling, and attaches to a port knockout on your computer case.
Specifications: 2.5in & 3.5in
Drive Connectors 1 - SATA (7 pin; Data) Receptacle
Host Connectors 1 - mSATA (52 pin; Mini SATA) Male
Max Drive Capacity Currently tested with up to 4TB 7200 RPM hard drive
Type and Rate SATA III (6 Gbps)
Features: Works with 50mm mSATA SSD (Full or Half Size)
No Sacrifice on the mSATA SSD Performance
Fully compatible with SATA 2.6
Supports ATA/ATAP-7 Specification
Supports Dual Power Voltages : 1.8 V and 3.3 V
SAMSUNG PM800 mSATA
Transcend mPCIE mSATA
TOPSSD MiniPCIE mSATA SSD Series mSATA
Innodisk Corp. mSATA J80 SSD mSATA
Renice X3 50mm mSATA SSD
INTEL Solid-state Drive 310 Series mSATA
Toshiba THNSNB064GMCJ 64G mSATA
Specifications: IDE Modes Supports master and slave drives
Connector A 1 - IDE 40 pin Male
Connector A 1 - SATA Power Female
Connector A 1 - SATA Data 7 pin Female
Connector B 1 - LP4 Female
Connector B 1 - LP4 Male
Maximum Transfer Rate 133MB/sec
Connector Types 1 - LP4 Male
Connector Types 1 - LP4 Female
Connector Types 1 - IDE 40 pin Male
Connector Types 1 - SP4 Male
Connector Types 1 - SATA Data 7 pin Female
Connector Types 1 - SATA Power Female
Features: 48 bit addressing supports larger capacity drives
Compatible with Ultra ATA 133 specifications
Complete hardware solution, no software needed. Works with PC, MAC, and Linux.
Serial ATA 1.0 compliant
Simple Plug and Play installation
Supports all types of SATA storage devices.
This all in one solution includes the appropriate power cables to ...
Specifications: Chipset ID: Sunplus - SPIF223A
1 - SP4 (4 pin; Small Drive Power) Male
2 - SATA (7 pin; Data) Plug
Host Connectors: 1 - IDE (40 Pin; EIDE/PATA) Female
Type and Rate: SATA I (1.5 Gbps)
OS Compatibility: OS independent; No Software or drivers required
Dimensions: 1.8" x 0.4" x 2.1" W x H x L
Weight: 0.4 oz.
Features: Compliant with SATA specification 1.0
Supports Ulta ATA 100/133 PATA (IDE) controllers
No driver/software installation required
Specifications: The serial ATA to IDE converter allows standard parallel ATA hard disk drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc, to be used with serial ATA PCI cards or motherboards with serial ATA port and meet the specification of Serial ATA 1.0 interface.
Features: Compliance with Serial ATA Gen 1.0.
Master/slave device emulation support.
Support PIO mode 0~4.
Support Ultra DMA mode 0~7.
Support UDMA data transfer rates of up to 150MBps
Support ATAPI Packet command set.
Support 48-bit LBA addressing.
Support additional ATA command for serial ATA SCR access.
Serial ATA power save mode supported.
Serial ATA BIST operation.
Package Contents: Serial ATA to IDE Converter
Features: Jmicro JM20330 Chipset
Plug & Play and Hot-swapping capability
150MB/s transfer rate
Automatic SATA 3.0/1.5 Gbps speed negotiation
Serial-ATA 1.0 specification compliant
Support Serial ATA hot-plug
Support ATA Host Bridge
Support ATA PIO and UDMA modes 0 to 4
ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
Support 3.5" IDE hard drives and 5.25" optical drives
Ultra low power consumption
Work for both AC and DC couple between the transmitter and the receiver
Provide specified OOB signal detection and transmission
Support Spread Spectrum Clocking to reduce EMI
Support Partial/Slumber power management
Provide adjustable TX signal amplitude and pre-emphasis level
General Brand Micro Connectors Model L02 220 Connectors
Connector A 2.5" Connector B 3.5" Specifications 2.5in to 3.5in HDD Adapter cable Provides 44 pin female IDE connector and a 40 pin male IDE connector Allowing you to connect a 2.5in ...
StarTech.com USB 3.0 Dual Hard Drive Docking Station
Model Brand StarTech Spec Color Black Internal Interface
SATA I/II/III External Interface USB 3.0 Dimensions & Weight Dimensions Height:2.8" x Width:5.2" x Depth:5.8" Weight 1.10 lb Packaging Package Contents USB 3.0 to Dual 2.5/3.5in SATA Hard Drive Docking Station 1 ...
Model Brand StarTech Model SATDOCK2REU3 Spec Color Black
Size 2.5" & 3.5" Internal Interface SATA II External Interface USB 3.0 Maximum Capacity (per Bay) Currently tested with up to 4TB 7200 RPM 3.5" hard drives and 1TB 7200 RPM 2.5" ...
StarTech S2510BU3PW Steel / Plastic 2.5" Black SATA
Fits 2.5" form factor SATA drives up to
9.5mm in height Hard drive temperature reporting on most HDD/ SSD Built in touchpad High speed 32 bit ARM based controller No software or drivers required