Your Browsing History
Quick View
Fits Raspberry Pi CM5 Dual Gigabit Ethernet Base Board - Mini Industrial IoT Gateway Carrier Board with 40-Pin GPIO, USB 3.0, Fan Header - Compatible with CM5 Lite/eMMC Modules
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-23
- $82.05 –
- Free Shipping
Quick View
RGB Full-Color LED Matrix Panel Display, 64×32 Pixels for Raspberry Pi, Pico, ESP32, Ardui,etc, Adjustable Brightness
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-77
- $98.47 –
- Free Shipping
Quick View
1.54 Inch E-Ink Display HAT Epaper Display 200x200 SPI Interface Black White Red Color E-Paper Screen for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2 W Jetson Nano
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-148
- $54.69 –
- Free Shipping
Quick View
Fits Raspberry Pi Compute Module 5 IO Board with PoE Feature, M.2 NVMe SSD Support, GPIO Header,Ethernet, USB, HDMI, and TF Slot for All CM5 Variants
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-100
- $111.15 –
- Free Shipping
Quick View
PCIe to M.2 Multifunctional Adapter Compatible with Raspberry Pi 5,for NVMe Protocol M.2 Solid State Drive,Compatible with 2230/2242 Size M.2 Solid State Drives
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-160
- $41.02 –
- Free Shipping
Quick View
HDMI Switcher 3 in 1 Out 4K HD HDMI Switcher Splitter,Support 4K/2K@30Hz and 4K/2K (YCbCr420)@60Hz Resolution,HDMI 1.4b,DVI1.0,Compatible with Raspberry Pi, PC, Smartphone
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-179
- $39.19 –
- Free Shipping
Quick View
Fits Raspberry Pi 5 PoE HAT (H) - 5V 5A Output, IEEE 802.3af/at Compliant Power Over Ethernet HAT for Pi 5/CM5, Compact Design, Compatible with Official Case & Active Cooler
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-301
- $87.52 –
- Free Shipping
Quick View
1.9inch Segment E-Paper Module 91 Segments Black/White Color epaper Display I2C Screen for Raspberry Pi/STM32/Arduino,Ideal for Temperature and Humidity Meter, Humidifier, Digital Meter
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-218
- $47.00 –
- Free Shipping
Quick View
2Pack ESP32-H2 Mini Development Board Based on ESP32-H2FH4S chip,RISC-V 32-bit Single-core Processor,Supports BLE/Zigbee/Thread Wireless Communication,4MB Flash
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-286
- $44.38 –
- Free Shipping
Quick View
Three Color 1.54inch E-Ink Display Module (B), 200x200 Resolution 3.3V/5V Red Black White E-Paper Display Epaper Screen for Raspberry Pi/Arduino/STM32 SPI Interface,Full Refresh
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-289
- $49.76 –
- Free Shipping
Quick View
ESP32-C6 Microcontroller WiFi 6 Development Board Onboard ESP32-C6-WROOM-1-N8 with RISC-V 32-bit Sngle-core Processor, WiFi 6+Bluetooth 5+IEEE 802.15.4 Wireless Communication
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-180
- $26.81 –
- Free Shipping
Quick View
5Pcs 1 Channel DC 3V/3.3V Power Relay Module 3V Relay Switch Module with Optocoupler Relay Module Isolated Drive Control Board 10A 250VAC 10A 30VDC Control Development Board
Limited time offer, ends 09/19
- Model #: Kepler-8.10-OYS-462
- $12.99 –
- Free Shipping
Quick View
4inch Raspberry pi HDMI LCD Display Module 800x480 Resistive Touch IPS Screen Supports All Revsions of Raspberry Drivers Provided
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-577
- $109.44 –
- Free Shipping
Quick View
RP2350 MCU Board with 1.28inch Round Touch LCD with Metal Case,240×240 Pixels 65K Color IPS Display,6-axis SensorDual-core & Dual-Architecture Design
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-143
- $77.50 –
- Free Shipping
Quick View
PCIe to 4-Ch NVMe M.2 Adapter Board for Raspberry Pi 5 | 4-Ch SSD Expansion | Boot Support | 7V-24V Power Input | LED Indicators with Power Supply
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-350
- $112.15 –
- Free Shipping
Quick View
ESP32-C5 Development Board Wi-Fi 6 Devkit Based on ESP32-C5-WROOM-1 Series Module,240MHz and 5GHz Dual-Band,Multi-Protocol RISC-V MCU32MB Flash and 8MB PSRAM,with Built-in Antenna
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-139
- $43.30 –
- Free Shipping
Quick View
Stepper Motor HAT for Raspberry Pi,Jetson Nano Onboard Dual DRV8825 Motor Controller Built-in Microstepping Indexer Drives Two Stepper Motors Up to 1/32 Microstepping
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-200
- $73.84 –
- Free Shipping
Quick View
2-DOF Pan-Tilt HAT for Any Version of Raspberry Pi/Jetson Nano Onboard PCA9685 PWM Chip and TSL2581 Ambient Light Sensor for Camera Moving and Light Intensity Sensing
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-149
- $76.58 –
- Free Shipping
Quick View
Industrial USB to TTL (D) Serial Cable Onboard Original FT232RNLFor Raspberry Pi 5 Serial Port Debugging with with Separated 4pin Header & SH1.0 3PIN Connector
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-182
- $43.75 –
- Free Shipping
Quick View
2-Channel Isolated CAN Bus Expansion HAT Compatible with Raspberry Pi 5/4B/3B+/Zero/Zero W/Zero WH/Jetson Nano,2-CH CAN HAT with MCP2515 + SN65HVD230 Dual Chips Solution
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-77
- $79.78 –
- Free Shipping
Quick View
ESP32-S3 3.5inch Capacitive Touch Display Development Board,320×480 Pixels 262K Color IPS Display Panel Support Wi-Fi and BLE 5
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-100
- $82.06 –
- Free Shipping
Quick View
OLED/LCD HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W with 2inch IPS LCD Main Screen and Two 0.96inch Blue OLED Secondary Screens 40PIN GPIO Header
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-228
- $68.37 –
- Free Shipping
Quick View
Four Color 2.13inch E-Ink Display HAT (G), 250x122 Resolution 3.3V/5V Red Yellow Black White E-Paper Display Screen for Raspberry Pi/Jetson Nano/Arduino/STM32, SPI Interface
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-64
- $54.70 –
- Free Shipping
Quick View
Dedicated Cooling Fan for NVIDIA Jetson Nano Developer Kit PWM Speed Adjustment Stong Cooling Air 4PIN Reverse-Proof Connector 5V 40mm×40mm×20mm
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-119
- $29.81 –
- Free Shipping
Quick View
2.9 Inch E-Paper Display Module (G) 296x128 E-Ink Screen Red/Yellow/Black/White SPI Interface ePaper with 3.3V/5V Voltage Translator, for Raspberry Pi/Jetson Nano/for Arduino/ESP32/STM32
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-272
- $62.90 –
- Free Shipping
Quick View
for Jetson Nano Case with Fan Acrylic Clear Case Enclosure 5V PWM Cooling Fan Strong Cooling Air with 4PIN Reverse-Proof Connector
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-184
- $26.11 –
- Free Shipping
Quick View
for Jetson Nano Fan Dedicated DC 5V Cooling Fan with 3PIN Reverse-Proof Connector 40mm×40mm×10mm
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-269
- $13.28 –
- Free Shipping
Quick View
ESP32-S3 4.3inch LCD Display Development Board with 2.4GHz WiFi and BLE 5 Support,32-bit LX7 Dual-core Processor,Onboard CAN, RS485, I2C Interface
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-284
- $86.62 –
- Free Shipping
Quick View
RP2040 MCU Board with 1.28inch LCD,Round Shape, Accelerometer and Gyroscope Sensor,30 × Multi-Function GPIO Pins
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-81
- $65.27 –
- Free Shipping
Quick View
ESP8266 Burner Development Board Test Frame Module Downloader Support for ESP-12F ESP-07S ESP-12E ESP-01S ESP12S ESP-01 Flash Download Tool Test Board Code Burner
Limited time offer, ends 09/19
- Model #: Kepler-8.10-OYS-184
- $17.13 –
- Free Shipping
Quick View
USB 3.2 Gen1 and Gigabit Ethernet HUB HAT for Raspberry Pi 4 B 3 B+ 3 B 2B Zero Zero 2 W Zero WH,3X USB 3.2 Gen1 Ports, 1x Gigabit Ethernet Port,Compatible with USB 3.0/2.0/1.1
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-223
- $83.01 –
- Free Shipping
Quick View
for Raspberry Pi 2-CH Isolated CAN Bus Expansion HAT Dual Chips Stackable Design for Expanding Multiple CAN Channels 2-CH CAN HAT+ for Jetson Nano
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-286
- $95.73 –
- Free Shipping
Quick View
4.2inch E-Ink Display E-Paper Screen Module for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2 W Jetson Nano SPI Interface 400x300 Resolution
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-293
- $117.62 –
- Free Shipping
Quick View
Tri-Color 1.54 Inch E-Ink Display Module Three-Color Resolution 200x200 3.3v E-Paper Electronic Screen Panel with Embedded Controller SPI Interface Support for Raspberry Pi/STM32/Nucleo/Jetson Nano
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-32
- $54.69 –
- Free Shipping
Quick View
ESP32-S3 1.85inch Round Display Development Board 360×360 Resolution 262K Color LCD, 32-bit LX7 Dual-core Processor,Supports WiFi & Bluetooth
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-7CXY23-227
- $82.06 –
- Free Shipping
Quick View
Mini Base Board (B) Designed for Raspberry Pi Compute Module 4 CM4 Or Being Integrated Into End Products 40PIN GPIO Header
Limited time offer, ends 09/20
- Brand: LORDWORLD
- Model #: 26-8CXY19-517
- $106.68 –
- Free Shipping