Question 1

My current PC setup is white does this come in white?

Accepted Answer

It does not. The p400, however, does and is a better version of this case but of course it costs a bit more but having built in both cases, the p400 is a lot better in my opinion.

Question 2

Does it fit a 212 Evo?

Accepted Answer

Why wouldn't it? That all has to do with your motherboard being used, as far as the case yes more then enough room/height.

Question 3

How is the air flow?

Accepted Answer

I'm running an i7 4790k oc'd to 4.5 GHz with a MSI Core Frozr L with a 140mm for front intake and a 120mm in back for exhaust and my thermals have been really good so far.

The front of the case at first appeared like it might inhibit airflow but the air moves through extremely well.

Hope this helps.

Question 4

I looked at several boxes made by this company and I have to think they are made to be bread boxes, or shoe boxes rather than computer cases. Where do I put my DVD and CD ROM drives? For some bizarre reason the front door does not swing open like it needs to since it doesn't have any break-out panels for DVD/CD access. I hope there are no computer case manufacturers that think I don't need to install software / watch movies / or listen to music. Will they leave out a place to put the power supply and motherboard next?

Accepted Answer

in an effort to maximize space there is no place for DVD or CD drivers. Much like there are not floppy drive bays anymore. Most software that people use is online now. However being a person who enjoys some retro gaming there are some nice USB DVD or CD drivers, or you could pick an older case.

Question 5

Does it come with case fans? And if so, how quiet are they?

Accepted Answer

Comes with the fan you see in the back right next to where mother board I/O would be, It's got 3 other fan mounting spots as well. The stock fan is super quiet. I guarantee this to be well worth it if you're going for a regular sized build. I love mine, got it right as they released

Question 6

can you do a vertical gpu mount?

Accepted Answer

There’s no official way to do it, but a YouTuber “Science Studio” used a third party accessory to do it.

Question 7

how is the cooling on this case?.it don't look like the front panel offers much venting for proper cooling for a gaming rig.

Accepted Answer

It works fine, of course, it's mostly covered with vents, but I didn't install any intake fans. There is one on the back and room on the top for another outtake, honestly, airflow is fine my GPU and CPU have never really gone above 70c/75c, CPU was fine even with stock intel cooler, with a third party one it's even better, and my GPU Is fine even with the fan speed set pretty passively, and I'm in Florida so it doesn't get super cold, temps are absolutely fine with this.

Question 8

Does this case come with fans?

Accepted Answer

Just one in the back. Needs 2 fans for front and 1 on top

Question 9

How can a "midtower" be 24" tall? That's a fulltower. or is the measurement listed wrong on the specifications page?

Accepted Answer

It's 18". It's pretty cramped inside and you can't really fit a whole lot of expansions parts, but it does fit a 280mm rad on the front and a full ATX motherboard. I would recommend the p400 if you want a case like this, it's a little more expensive but not much and well worth the price. Phanteks definitely had to cut some corners with this one to get the price down.

Question 10

Would a Corsair Hydro H110i fit in the front? It's a 280mm radiator. Or should I go with a smaller cooler?

Accepted Answer

I think it would, in mine there is mounts for the standard radiators that have 120mm fans, and than there is another set of mounts for a bigger radiator. You should be good.

CASE SPECIFICATIONS

Dimension	200 mm x 450 mm x 400 mm (W x H x D) 7.8 in x 17.7 in x 15.7 in
Form Factor	Midtower
Material(s)	Steel chassis, Tempered Glass
Motherboard Support	E-ATX, AT X, Micro-ATX, Mini ITX (E-ATX up to 275mm width)
Front I/O	2x USB 3.0, Mic, Headphone, RGB LED SW
Side Window	Yes, Tempered glass

PCI SLOTS & DRIVE BAYS

PCI slots	7
Internal 3.5"	2x (2 included)
Internal 2.5"	1x (1 included)

Cooling	120mm fan	140mm fan

Front	2x	2x
Top	1x	1x
Rear	1x (included)

Liquid Cooling	120mm radiator		140mm radiator

Front	Up to 240		Up to 280
Rear	120		-

INCLUDED ACCESSORIES

Premium fan 120 mm	1x
3.5" modular HDD bracket	2x
2.5" SSD bracket	1x

CLEARANCE

CPU Cooler	160 mm (6.3 in)
Cable Management	35 mm (1.4 in)
Graphic card	330 mm (13.0 in)
Power supply (incl. cables)	197 mm (7.7 in)

Packaging Information	PH-EC300PTG_BK

Net Weigth	6 kg (13.2 lbs)
Gross Weigth	7 kg (15.4 lbs)
Package Dimension	508 mm x 282 mm x 474 mm (WxHxD)		20 in x 11.1 in x 18.7 in

Warranty

Length	5 Years Limited

Brand	Phanteks
Series	Eclipse P300
Model	PH-EC300PTG_BK

Type	ATX Mid Tower
Color	Black
Case Material	Steel Chassis, Tempered Glass Window
With Power Supply	No
Power Supply Mounted	Bottom
Motherboard Compatibility	Micro ATX / ATX / Mini ITX / E-ATX (E-ATX* - up to 275 mm wide)
Side Panel	Tempered Glass Panel
Dust Filters	Bottom / Front / Top

Internal 3.5" Drive Bays	2 (2 x included)
Internal 2.5" Drive Bays	2 (1 x included)
Expansion Slots	7

Fan Options	Front: 2 x 120mm / 2 x 140mm fan Rear: 1 x 120 mm fan (included) Top: 1 x 120mm / 1 x 140mm fan
Radiator Options	Front - Up to 240mm / Front - Up to 280mm / Rear - Up to 120mm

Phanteks Eclipse P300 PH-EC300PTG_BK Black Steel Chassis, Tempered Glass Window ATX Mid Tower Computer Case

Eclipse P300 SERIES

HIGH AIRFLOW

CABLE MANAGEMENT

Learn more about the Phanteks PH-EC300PTG_BK

Customer Reviews of the Phanteks PH-EC300PTG_BK

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Max GPU Length	330 mm
Max CPU Cooler Height	160 mm
Max PSU Length	200 mm
Dimensions	17.70" x 7.80" x 15.70"
Weight	13.20 lbs.

Item#: N82E16811854068