Save more w/ Vertical GPU Card Holder Kit combos, limited offer.
Types: GPU Bracket
Colors: Black / Gray
Specifications: Dimensions(L x W x H):
GFX Holder kit: 249 x 148.1 x 141.8mm (close size) / 9.80 x 5.83 x 5.58"
305 x 178.1 x 141.8mm (open size) /12.00 x 7.01 x 5.58"
Riser cable: 165mm / 6.49"
Supported Graphics Cards: E-ATX, ATX , Micro ATX (may interfere with component installation on the rear panel. Max. CPU cooler height limited to 70mm.)
Supported GPU Type: Any length, up to3 slots wide
Riser Cable Model: Riser Cable PCIe 4.0 x16
Compatibility: PCIe 4.0 and older
Certifications: BKC210933AC
PCB / Wire UL Numbers: E1895721/E252840
Electronic Component Materials: PCBA, Tinned Copper Wire 30 AWG
Insulation Materials: PE, TPE
Other Materials: ABS, PP, SGCC Steel, Nickel, Gold, Brass
Connectors: PCIe x16 Male to PCIe x16 90° Female
Rated working voltage and current: DC 12V / 5A
Operating Temperature: -20° to ...
Connector Detail: 1 x 20+4 pin ATX connector (550mm)
1 x EPS / ATX 12V 8 pin (4+4) connector (750mm)
2 x PCI-E 8 pin (6+2)+PCI-E 6 pin connectors (550mm+150mm)
3 x four (4) SATA 90 Degree connectors (550mm+150mm+150mm+150mm)
1 x three (3) 4 pin+floppy connectors (550mm+150mm+150mm+150mm)
Specifications: As SilverStone SFX / SFX-L power supplies with modular cables became more powerful and desirable, the demand for using them in larger chassis has reached a point that made sense for SilverStone to create the PP05-L cable kit. This cable kit is designed to replace shorter cables that came included with SilverStone SFX / SFX-L PSUs to full size ones suitable for use in mid to full sizes chassis. The PP05-L is also great for those with SilverStone’s ATX PSUs that wish to replace their bulkier round or sleeve cables ...
Audio: Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 20-20,000 Hz
Low Frequency Roll Off: 80 Hz, 12 dB/octave
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Impedance: 120 ohms
Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise: 12 dB SPL
Dynamic Range: 136 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 3.8 mA typical
Switches: Flat, roll-off; 10 dB pad (nominal)
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica Case Style: R5