1. Comparing with ATOMSTACK A10 PRO 10W, TWO TREES TS2 10W and SCULPFUN S10 10W, the price is $589 and 699 respectively, our engraving machine will be more advantageous in price.
2. Electronic components such as the main board and the motor are built-in, and the appearance of the whole machine looks neater.
3. The laser head module adopts a lens module, which reduces the light spot to 0.06 * 0.08 mm, the laser focal length is 50mm, the engraving is more fine, and the cutting ability is strong.
4. The external air blowing structure of the laser head enhances the cutting ability, makes the cutting surface clean and smoke-free, and the incision has no chamfer.
5. Four-wheel alignment is purchased for X and Y axis transmission, which makes the transmission smoother and the pulley wears less.
6. Optimize the cable routing method. The X and Y axis routing all adopts the form of tank chain, so that the wiring harness is clean and there is no disconnection during operation; at the same time, it also avoids the safety risk caused by the wire falling into the working area.
7. The Z-axis adopts a sliding table structure (patented design). At present, the mainstream engraving machines on the market are basically in the form of a simple dovetail groove, and there is a problem of low focusing accuracy.
8. Power switch with indication, visual switch effect.
9. The power switch lock prevents accidental operation caused by unauthorized personnel, and meets the latest safety regulations.
10. Emergency stop switch, when the machine is running, it can quickly cut off the power when it encounters an abnormality to prevent the occurrence of safety accidents.
11. Anti-tilting protection, when the machine is tilted more than 15-30°, the laser automatically stops output to prevent safety accidents caused by accidental tilting of the machine during operation.
12. Modular assembly, novice assembly time does not exceed 15 minutes.
13. The whole machine is designed in industrial style, with solid materials and stable operation.