Aeotec Water Sensor 7 Pro: protect and manage your smart home
Battery powered. Compatible with SmartThings. 3-in-1 Leak sensor made with Z-Wave.
Water Sensor 7 Pro.
A 3-in-1 multi-sensor that's your first line of defence against expensive leaks, drips, pipe bursts, and floods. And, because it's pro-level, it's 3 inbuilt sensors work to make your smart home truly smart;
- Water sensor: precision engineered, Water Sensor 7 Pro's probes can detect as little as 0.02” of liquid upon a surface
- Heating sensor: manage a room's heating, or underfloor heating, with Water Sensor 7 Pro measuring temperature ranges between 14°F and 149°F
- Humidity sensor: manage a room's air quality and its ventilation. Measuring relative humidity between 0% and 80%, Water Sensor 7 Pro can be used to activate humidifiers, dehumidifiers, extractor fans, and other air quality systems.
- Wireless and battery powered: installation is as easy as sticking it to a surface with Water Sensor 7 Pro being powered for up to 3 years with a single battery charge, and wirelessly communicating via Z-Wave.
- SmartThings water sensor & Z-Wave Plus V2: optimal measurement and wireless performance is possible through Water Sensor 7 Pro's exclusive combination of Z-Wave Gen7 and 700 series. A truly smart, smart home requires a smart hub and Water Sensor 7 Pro is compatible with the best of them including Aeotec Smart Home Hub and SmartThings.
Monitor for water leaks
Water Sensor 7 Pro's stainless-steel detection-tip can detect minuscule amounts of water – as little as 0.02” of liquid on a surface - making it your first line of defence against damaged and faulty plumbing.
Once detected, the gateway hub it is connected to can automatically take emergency steps: sending you a notification, turning off your water mains through a connected water valve (sold separately), sounding sirens, and more.
Monitor temperature & humidity
Part of Aeotec's multi-sensor range, Water Sensor 7 is a 3-in-1 sensor which offers more than just leak detection.
- Temperature sensor: measure between 14°F and 149°F
- Humidity sensor: measure between 0% and 80% relative humidity
These two additional sensors can be used to automate extractor fans, underfloor heating, ventilation. and cooling.
ZWave hub required
A smart home is only truly intelligent when a dedicated automation hub powers it. Water Sensor 7 Pro uses Z-Wave, an automation dedicated wireless standard that is quicker, more secure, and uses less battery power than WiFi.
Water Sensor 7 Pro's leak alert and temperature / humidity features can best with compatible gateways including: Aeotec AutoPilot, Aeotec Smart Home Hub, Aeotec Z-Stick, HomeSeer, open-source Home Assistant, SmartThings, and Vera.
Safety sensor. Smart sensor.
A first line of protection for your home. But not the only one.
Aeotec also produces the following best-selling automation sensors. Each has been engineered to make your automation system smarter and your home safer and more secure.
 Door / Window Sensor 7 | Door / Window Sensor 7 Pro |  MultiSensor 6 |  Recessed Door Sensor 7 | |
|---|---|---|---|---|
| Customer Reviews | — | — | — | — |
| Price | — no data | — | — no data | — |
| Type | Open / close sensor | 3-in-1 multi-sensor | 6-in-1 multi-sensor | Open / close sensor |
| SmartThings compatible | With device handler | ? | ? | ? |
| Connect to SmartThings with SmartStart QR scanning | ? | ? | ? | ? |
| Z-Wave Gen7 | ? | ? | ? | ? |
Aeotec Water Sensor 7 Pro: protect and manage your smart home
Battery powered. Compatible with SmartThings. 3-in-1 Leak sensor made with Z-Wave.
Water Sensor 7 Pro.
A 3-in-1 multi-sensor that's your first line of defence against expensive leaks, drips, pipe bursts, and floods. And, because it's pro-level, it's 3 inbuilt sensors work to make your smart home truly smart;
- Water sensor: precision engineered, Water Sensor 7 Pro's probes can detect as little as 0.02” of liquid upon a surface
- Heating sensor: manage a room's heating, or underfloor heating, with Water Sensor 7 Pro measuring temperature ranges between 14°F and 149°F
- Humidity sensor: manage a room's air quality and its ventilation. Measuring relative humidity between 0% and 80%, Water Sensor 7 Pro can be used to activate humidifiers, dehumidifiers, extractor fans, and other air quality systems.
- Wireless and battery powered: installation is as easy as sticking it to a surface with Water Sensor 7 Pro being powered for up to 3 years with a single battery charge, and wirelessly communicating via Z-Wave.
- SmartThings water sensor & Z-Wave Plus V2: optimal measurement and wireless performance is possible through Water Sensor 7 Pro's exclusive combination of Z-Wave Gen7 and 700 series. A truly smart, smart home requires a smart hub and Water Sensor 7 Pro is compatible with the best of them including Aeotec Smart Home Hub and SmartThings.
Monitor for water leaks
Water Sensor 7 Pro's stainless-steel detection-tip can detect minuscule amounts of water – as little as 0.02” of liquid on a surface - making it your first line of defence against damaged and faulty plumbing.
Once detected, the gateway hub it is connected to can automatically take emergency steps: sending you a notification, turning off your water mains through a connected water valve (sold separately), sounding sirens, and more.
Monitor temperature & humidity
Part of Aeotec's multi-sensor range, Water Sensor 7 is a 3-in-1 sensor which offers more than just leak detection.
- Temperature sensor: measure between 14°F and 149°F
- Humidity sensor: measure between 0% and 80% relative humidity
These two additional sensors can be used to automate extractor fans, underfloor heating, ventilation. and cooling.
ZWave hub required
A smart home is only truly intelligent when a dedicated automation hub powers it. Water Sensor 7 Pro uses Z-Wave, an automation dedicated wireless standard that is quicker, more secure, and uses less battery power than WiFi.
Water Sensor 7 Pro's leak alert and temperature / humidity features can best with compatible gateways including: Aeotec AutoPilot, Aeotec Smart Home Hub, Aeotec Z-Stick, HomeSeer, open-source Home Assistant, SmartThings, and Vera.
| Compatibility | Aeotec AutoPilot, Aeotec Smart Home Hub, Aeotec Z-Stick Gen5+, Aeotec Z-Stick 7, SmartThings, Hubitat, Fibaro Home Centre, Vera, HomeSeer, Zipato, and more |
| Battery | 1/2 AA (ER14250) battery. Included. |
| Battery life | Up to 3 Years |
| Z-Wave version | Z-Wave Plus V2, 700 series, Gen7, S2 security, SmartStart |
| Water sensor | Detects as little as 0.02” of liquid and upwards |
| Temperature sensor | Measures between 14°F and 149°F with as little as ±1.8°F of variance |
| Humidity sensor | Monitor between 0% and 80% with as little as ±3% of variance |
| Wireless | Wireless and battery powered; installs easy with screws or double sided tape |
Safety sensor. Smart sensor.
A first line of protection for your home. But not the only one.
Aeotec also produces the following best-selling automation sensors. Each has been engineered to make your automation system smarter and your home safer and more secure.
Door / Window Sensor 7 | Door / Window Sensor 7 Pro | MultiSensor 6 | Recessed Door Sensor 7 | |
|---|---|---|---|---|
| Customer Reviews | — | — | — | — |
| Price | — no data | — | — no data | — |
| Type | Open / close sensor | 3-in-1 multi-sensor | 6-in-1 multi-sensor | Open / close sensor |
| SmartThings compatible | With device handler | ? | ? | ? |
| Connect to SmartThings with SmartStart QR scanning | ? | ? | ? | ? |
| Z-Wave Gen7 | ? | ? | ? | ? |