AODELAN WTR-2 camera remote control is a combined wireless and wired timer controlled remote shutter release.
In the wireless mode allows you can to be away from your camera to trigger the shutter without touching the camera and causing it to eliminate even the slightest shake vibrate.
Wirelessly up to 196 feet.Using 2.4G transmission technology more ultra- powerful anti-interference ability.
In the wired mode you have the flash hotshoe still available if needed.The receiver doesn't actually have to be connected to the hotshoe, because it is mainly working by the wire connect cable to the camera.
It is ideal for wide variety of photographic uses that require timed or contact free shutter release, including wildlife, long exposure, astral, studio and time lapse photography.
Note:
1.A transmitter can control multiple receivers simultaneously. A receiver an receive signal from one transmitter only.
2.The "cold shoe" just to hold it conveniently--no electronic connection.
4 shutter release mode and 5 setting for timer shooting function
4 shutter release mode:
Single shooting, 2 second delay modes, continuous shooting, bulb exposure and are available.
5 setting for timer shooting:
Delay exposure (DELAY) : A self timer before a photo is taken.
Long exposure (LONG) : Ther shutter will stay open for the time programmed into the timer.
Interval (INTVL) : Setting the interval time bteween every shoots.
Number (N) : Set the number of exposures time.
BKLN (BKLN) : When the BKLN mode is turn on, it allows a group of photos to be taken at automatically exponentially changing exposure times.
Timing setting accurate to 0.1 seconds
Timer can be accurate to 0.1 sec ,a good ideal for time-lapse photography to record the blooming flowers, sunsets or the night sky, but you dont need to wait for the whole time.
Transmission distance:
2.4GHz 60m+ (open space without interference)
Interval timer shooting
If you want to continuously take pictures every 5 seconds,the following it is the setting way:
for remote control : setting transmitter to the TIMER models - N sets the number of picture you wants to shoot - INTVL is set to 5.
If you want to take more than 200 picture,pls set the N to [ -- ].
Bulb shooting
Bulb shooting you can using that function to take a darker view of the light, or you can make a dreamlike picture, such as a waterfall and a night view of a city highway.
 Intervalometer shutter remote for Canon |  br e1a camera remote |  wireless remote control |  shooting grip for canon |  Photography Studio Lighting kit | |
|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — |
| Price | — | — | — | — no data | — no data |
| Video Recording | no data | ? | no data | ? | no data |
| Wireless Remote | ? | ? | ? | ? | no data |
| Wired Remote | ? | no data | ? | no data | no data |
| Timer Remote | ? | no data | no data | no data | no data |
We have been focusing on the camera accessories industry more than 15 years, integrating production, research and development and sales.
Camera wireless/wired shutter remote, release cable, flash trigger, battery pack, Camcorder Zoom Controller it is our main product.
Our aim is to supply fast, superior and valuable product and shopping experience to customers.
Best-sellers
Wireless Flash Trigger
New Coming
This BR-E1A remote works at first, but after a while it wont pair.Why?
Check all your settings. Make sure that the remote is switch to photo or video.
This BR-E1A remote can working with videos recording, but can’t take still picture. Why?
Check whether if had select on the remote from video to photos mode or set the drive mode to Self-timer: 10sec/Remote.
This BR-E1A remote show had paired, but can’t take still picture. Why?
Check select on the remote set to "photo" mode, setting to your camera to "Drive Mode" - it to to "self-timer:10sec/remote" - stress the "remote" part of that.
Does have to attached the WTR-2 receiver on the hot shoe?
Don't need, the connection between camera and receiver is the shutter release cable, not the hot shoe.
This WTR-2 timer shutter how many photos will allow to take at one time?
number of shots: 1-199 photos programmable and - - being unlimited photos.
This WTR-2 shutter can how long of an exposure (single) can you take?
Exposure time: 0s to 99hrs 59min 59s in one second increments.To get a single exposure, set the "N" value to 1. Start the exposure by pressing the "play" button.
AODELAN WTR-2 camera remote control is a combined wireless and wired timer controlled remote shutter release.
In the wireless mode allows you can to be away from your camera to trigger the shutter without touching the camera and causing it to eliminate even the slightest shake vibrate.
Wirelessly up to 196 feet.Using 2.4G transmission technology more ultra- powerful anti-interference ability.
In the wired mode you have the flash hotshoe still available if needed.The receiver doesn't actually have to be connected to the hotshoe, because it is mainly working by the wire connect cable to the camera.
It is ideal for wide variety of photographic uses that require timed or contact free shutter release, including wildlife, long exposure, astral, studio and time lapse photography.
Note:
1.A transmitter can control multiple receivers simultaneously. A receiver an receive signal from one transmitter only.
2.The "cold shoe" just to hold it conveniently--no electronic connection.
4 shutter release mode and 5 setting for timer shooting function
4 shutter release mode:
Single shooting, 2 second delay modes, continuous shooting, bulb exposure and are available.
5 setting for timer shooting:
Delay exposure (DELAY) : A self timer before a photo is taken.
Long exposure (LONG) : Ther shutter will stay open for the time programmed into the timer.
Interval (INTVL) : Setting the interval time bteween every shoots.
Number (N) : Set the number of exposures time.
BKLN (BKLN) : When the BKLN mode is turn on, it allows a group of photos to be taken at automatically exponentially changing exposure times.
Timing setting accurate to 0.1 seconds
Timer can be accurate to 0.1 sec ,a good ideal for time-lapse photography to record the blooming flowers, sunsets or the night sky, but you dont need to wait for the whole time.
Transmission distance:
2.4GHz 60m+ (open space without interference)
Interval timer shooting
If you want to continuously take pictures every 5 seconds,the following it is the setting way:
for remote control : setting transmitter to the TIMER models - N sets the number of picture you wants to shoot - INTVL is set to 5.
If you want to take more than 200 picture,pls set the N to [ -- ].
Bulb shooting
Bulb shooting you can using that function to take a darker view of the light, or you can make a dreamlike picture, such as a waterfall and a night view of a city highway.
Intervalometer shutter remote for Canon | br e1a camera remote | wireless remote control | shooting grip for canon | Photography Studio Lighting kit | |
|---|---|---|---|---|---|
| Customer Reviews | — | — | — | — | — |
| Price | — | — | — | — no data | — no data |
| Video Recording | no data | ? | no data | ? | no data |
| Wireless Remote | ? | ? | ? | ? | no data |
| Wired Remote | ? | no data | ? | no data | no data |
| Timer Remote | ? | no data | no data | no data | no data |
We have been focusing on the camera accessories industry more than 15 years, integrating production, research and development and sales.
Camera wireless/wired shutter remote, release cable, flash trigger, battery pack, Camcorder Zoom Controller it is our main product.
Our aim is to supply fast, superior and valuable product and shopping experience to customers.
Best-sellers
Wireless Flash Trigger
New Coming
This BR-E1A remote works at first, but after a while it wont pair.Why?
Check all your settings. Make sure that the remote is switch to photo or video.
This BR-E1A remote can working with videos recording, but can’t take still picture. Why?
Check whether if had select on the remote from video to photos mode or set the drive mode to Self-timer: 10sec/Remote.
This BR-E1A remote show had paired, but can’t take still picture. Why?
Check select on the remote set to "photo" mode, setting to your camera to "Drive Mode" - it to to "self-timer:10sec/remote" - stress the "remote" part of that.
Does have to attached the WTR-2 receiver on the hot shoe?
Don't need, the connection between camera and receiver is the shutter release cable, not the hot shoe.
This WTR-2 timer shutter how many photos will allow to take at one time?
number of shots: 1-199 photos programmable and - - being unlimited photos.
This WTR-2 shutter can how long of an exposure (single) can you take?
Exposure time: 0s to 99hrs 59min 59s in one second increments.To get a single exposure, set the "N" value to 1. Start the exposure by pressing the "play" button.