Meet Your Seller
Arctic Silver ArctiClean 60ml Kit Thermal Grease Remover & Purifier
- Unique 2-Step Process: ArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 T
- ArctiClean 1 Thermal Material Remover: ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads.
- ArctiClean 2 Thermal Surface Purifier: The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material.
- Using ArctiClean 2 With Other Solvents: ArctiClean 2 Thermal Surface Purifier removes the residue of citrus or petroleum based cleaners and inhibits flash corrosion on a copper or aluminum heatsink.
Any questions? Ask CelesteSM will help you find out quickly.
ArctiClean is a two-step cleaning kit from Arctic Silver, the first retail product from the union of Arctic Silver and Nanotherm technology. Step 1 dissolves old thermal grease or thermal pads from the CPU and heatsink, step 2 removes the residue and prepares the surface for a fresh application of thermal interface material. The kit holds 30 ml of each.
Properties
- Type: Thermal material remover and surface purifier
- Steps: 2 (ArctiClean 1 and ArctiClean 2)
- Contents: 2x 30 ml bottles (60 ml)
- For: Copper and aluminum heatsinks, CPU heat spreaders
Step 1: Thermal Material Remover
ArctiClean 1 uses a proprietary combination of citrus and soy based solvents to emulsify and dissolve thermal grease and thermal pads, so the old material wipes off with a clean cloth or paper towel. Arctic Silver describes the solvents as non-toxic and biodegradable and says they match or exceed many hazardous and volatile solvents such as fluorinated and chlorinated solvents, acetone, MEK, mineral spirits, isopropyl alcohol and toluene.
Step 2: Thermal Surface Purifier
The cationic surfactants in ArctiClean 2 remove the residue left by ArctiClean 1 and leave a clean surface for the new thermal interface material. Flash corrosion inhibitors minimize the corrosion layer on copper and aluminum, for closer contact between the thermal material and the heatsink. ArctiClean 2 also removes the residue of other citrus or petroleum based cleaners.
Why not just alcohol or acetone?
Arctic Silver explains that isopropyl alcohol or acetone may soften a thermal pad but does not dissolve it, so it takes a lot of rubbing and scrubbing; the same is true, less visibly, for thermal grease. ArctiClean 1 emulsifies the waxes, oils and fillers of the thermal material and keeps them suspended, so they also come out of the microscopic imperfections in the heatsink or heat spreader.
How to use it
- Remove rings or other jewelry that could scratch the surfaces. Take the heatsink or water block off and lay both parts on a clean, flat surface, thermal surfaces up.
- Pads: scrape off most of the pad with a credit card or similar plastic piece without scratching the base. Compound: wipe off the loose material with a dry cloth or paper towel.
- Soak the remaining material with several drops of ArctiClean 1, wait 30 to 60 seconds, then wipe it off gently. Repeat if needed.
- Always follow with ArctiClean 2: apply several drops, about as much as you used of ArctiClean 1, and wipe gently with a lint-free cloth until dry. Coffee filters make good, inexpensive lint-free cloths.
Technical data
- Model: ACN-60ml
- ArctiClean 1: Thermal Material Remover, 30 ml, pale yellow liquid with a citrus (orange peel) odor, flash point 91°C (196°F)
- ArctiClean 2: Thermal Surface Purifier, 30 ml, colorless liquid with a mild odor, pH 7.5
- Compliance: RoHS
Notes
- ArctiClean 1 dissolves PS plastic and other plastics of the same family. Do not use it to clean these plastics.
- Keep both bottles away from children and pets, and do not put them in your mouth.
In the box
- 1x ArctiClean 1 Thermal Material Remover, 30 ml
- 1x ArctiClean 2 Thermal Surface Purifier, 30 ml
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by ModMyMods Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory







