Question 1

How fast do the stock fans spin? And how loud are they?

Accepted Answer

Hey,

Okay so the stock fans spin anywere from 1800-2100 at least when I put them on my tach.
They are relatively quiet and not noticeable over the everyday muffle of sounds.

I do quite enjoy the case, the HHD bays are a bit under designed but other than that its a great case.

Question 2

Does anyone know how to remove the front blue led fan? It almost looks as if the fan is riveted but it could also be an allen wrench.

Accepted Answer

It might take a little force but also notice that there are clamps on the fan as well. They are snap on rods. Be careful because the channel the wire fits through won't allow the four pin to get out easily. Honestly I would recommend a new case, better quality for less money out there I am sure.

Question 3

Will this fit the Radeon 7770? my friends are saying it will
size of GPU: GPU: 8.66" x 4.33" x 1.38"

Accepted Answer

The GTX560 Ti is 9 inches long and fits with room to spare. This case is the biggest mid tower case I have ever done a build in and will fit most any card you want.

Question 4

Does this case come with ALL 4 fans or do you have to purchase them separately?

Accepted Answer

My case came with four fans (front, back, and two on top)

Question 5

Since the case comes with a total of 4 fans, will they take up all 4 peripheral power slots on my PSU?  Also, if I buy a after market cpu cooler (Coolermaster Hyper N520), do I need to plug that into a periphearal power slot on my PSU?

Accepted Answer

I can't vouch for this case and fans, but generally case fans come with molex connectors which have both male and female parts, so you can stack all 4 fans on the same molex connector.  The motherboard also has fan standoffs you can use to power the fans.  Most fans don't come with molex connectors, just the motherboard connector.

Question 6

My package does not have a user guide. Can anyone send me a copy of user guide? Thank you very much!

Accepted Answer

Hello,

Unfortunately we do not have the manual we can ship out since this item is manufacture sealed. In order to have the manual shipped to you the best way would be to contact he manufacture directly.

Hope this information helps.

have an EGGcellent day!

Question 7

Has anyone installed a CM 212 EVO in this case? How is the clearance?

Accepted Answer

This is a deep case. Should be no issue. Mine did not come with SATA cables for the hot swap bays so make sure you have 3 extra.

Question 8

Will my HD Radeon 7870 10 inch Graphics card will in this case?

Accepted Answer

It should my card is about that size. I have the 280x gigabyte overclock addition.

Question 9

Quick question about the side fans. From the pictures I don't see any place for the fans to mount. Does the case have to be modified for these to be attached? Also, the picture on the box looks like it shows mounting holes on the side with a grill finish and not plexi glass. Just wondering about that before I purchase,

Accepted Answer

There isn't any option for side mounting, just a plexi glass side. Also if you get this case and want to replace the front fan it is really difficult.

Question 10

I just recently bought this case and when I plug in my hard drive using the hot swap bays, the computer does not detect it. Do I have a faulty case?

Accepted Answer

You have to hook up the power and SATA cables to the connectors on the back of the circuit broad. It's same as our internal hard drive connectors.

Brand	CFI
Series	Diablo LT
Model	CFI-B1010

Type	ATX Mid Tower
Color	Black
Case Material	SECC / Mesh & Plastic Front Bezel
With Power Supply	No
Power Supply Mounted	Bottom
Motherboard Compatibility	Micro ATX / ATX
Side Panel Window	Yes

External 5.25" Drive Bays	4
External 3.5" Drive Bays	No
Internal 3.5" Drive Bays	4
Internal 2.5" Drive Bays	2
Hot-Swap Drive Bays	2
Expansion Slots	7

80mm Fans	No
120mm Fans	1 x 120mm Front LED Fan 1 x 120mm Rear Fan 2 x 120mm Side Fans
Side Air duct	No

Dimensions	7.87" x 19.29" x 19.41"
Weight	19.86 lbs.

CFI Diablo LT CFI-B1010 Black SECC / Mesh & Plastic Front Bezel ATX Mid Tower Computer Case

Learn more about the CFI CFI-B1010

Customer Reviews of the CFI CFI-B1010

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: N82E16811855002